The e:cue DMX to DALI/DSI converter allows the integration of DALI/DSI based dimming devices in DMX controlled surroundings. Its 6 outputs provide single channel DALI or DSI (user selectable) signals derived from 6 consecutive DMX channels for up to 96 dimming ballasts. It is either possible to connect all 96 DALI/DSI Fixtures to one output or a maximum of each 16 fixtures per output. Every DALI/DSI output uses a broadcast signal, which means all fixtures connected to one output will be set to the same values. Flexibility is made possible by user selectable auto or manual DMX addressing modes, RJ-45 or loose wiring in a DIN rail system housing. The device is optimized for performance in building automation environments while its compact form supports easy and intuitive setup in any lighting installation.
6 outputs with either 1200 baud DALI transfer speed or 600 baud DSI transfer speed controlled by 6 DMX channels
Up to 16 DALI/DSI ballasts per output, all controlled by same DMX channel (broadcast mode)
Single 110 to 230Vac supply voltage
DMX connectors (RJ45) allow standard CAT5 wiring
Loose wiring (in/out)
Power and DMX status LEDs
Manual and auto DMX addressing modes
DIP switches for configuration and manual addressing mode
User selectable number of DMX channels (1 to 6)
DIN rail system mounting or standalone operation
Spec Sheet available - Yes
Storage Temperature:
-20 to 70 °C
Operating/Storage Humidity:
0 to 80 % (non-condensing)