Detects when individuals climb over or cut through chain link or wire mesh fences.
Advanced built-in signal processor prevents false alarms.
Four sensitivity settings to tune each sensor to a particular fence section and intrusion type.
Two open-collector outputs – alarm and power failure
UV resistant case and epoxy sealed electronics provides maximum resistance to harsh environments.
Rated NEMA 4X and UL94 5V.
Use individually or chain units with each ranging from 40 to 60 feet away.
Includes mounting brackets for installing the sensor to fence fabric.
Screw terminals. Connect to digital input or RJ45 sensor port on an ENVIROMUX system. To connect to the digital inputs, use a 22 AWG 2-wire cable. Connect the other end to the sensor screw terminal. To connect to the RJ45 inputs, use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
Powered by E-2D/5D/16D
Operating voltage: 9-15V DC.
Spec Sheet available - Yes
Operating Temperature (Maximum):
131 F
Operating Temperature (Minimum):
-4 F
Depth:
4.70 in
Height:
1.60 in
Width:
2.55 in
E-16D
- Large Enterprise Environment Monitoring System. Power: AC. Logging: 1,000 data log entries; 1,000 event log entries.
E-16DEL
- Large Enterprise Environment Monitoring System. Power: AC. Logging: 1,200,000 data log entries; 3,000 event log entries.
E-2D
- Small Enterprise Environment Monitoring System
E-5D
- Medium Enterprise Environment Monitoring System
E-5D-IND48VLT
- Industrial Medium Enterprise Environment Monitoring System, 48VDC Power
E-5D-INDLT
- Industrial Medium Enterprise Environment Monitoring System