hamburger-nav-icon
region-flag-icon
Search by Category
Audio
Cameras
Cases & Bags
Computers & Software
Conferencing
Content Management
Control
Displays
Furniture
Lighting & Studio
Mounts & Rigging
Networking & Cabling
Power
Presentation
Production
Security & Safety
Signal Management
Search by Category
EnglishFrenchGermanItalianPortugueseSpanish
Network Technologies Inc (NTI) - E-FENCE1
Request Quote
network-technologies-nti

Fence Vibration Sensor

Model: E-FENCE1

  • Detects when individuals climb over or cut through chain link or wire mesh fences.
  • Advanced built-in signal processor prevents false alarms.
  • Four sensitivity settings to tune each sensor to a particular fence section and intrusion type.
  • Two open-collector outputs – alarm and power failure
  • UV resistant case and epoxy sealed electronics provides maximum resistance to harsh environments.
Compare
Project List
Product Info
Tech Specs
Related Products
Documents

Environment Monitoring System Vibration & Glass Break Sensors
Motion / Intrusion / Vibration Sensors compatible with E-2D, E-5D and E-16D

For more information, visit http://www.networktechinc.com/vibration-glass-break-sensor.html

  • Detects when individuals climb over or cut through chain link or wire mesh fences.
  • Advanced built-in signal processor prevents false alarms.
  • Four sensitivity settings to tune each sensor to a particular fence section and intrusion type.
  • Two open-collector outputs – alarm and power failure
  • UV resistant case and epoxy sealed electronics provides maximum resistance to harsh environments.
  • Rated NEMA 4X and UL94 5V.
  • Use individually or chain units with each ranging from 40 to 60 feet away.
  • Includes mounting brackets for installing the sensor to fence fabric.
  • Screw terminals. Connect to digital input or RJ45 sensor port on an ENVIROMUX system. To connect to the digital inputs, use a 22 AWG 2-wire cable. Connect the other end to the sensor screw terminal. To connect to the RJ45 inputs, use CAT5/5e/6 cable terminated at one end with RJ45 connector. Connect the un-terminated end to the sensor screw terminal.
  • Powered by E-2D/5D/16D
  • Operating voltage: 9-15V DC.
 
Request Quote