Pathway eDIN Contact Closure interface provides twelve DMX-controlled dry contact closures for both power and signal level switching. Multiple operating modes include momentary, maintained, 6-channel split and single channel select, where the DMX level of the start channel determines which relay is active. The eDIN #1003 provides DMX512 control over twelve form-C relays, for signal level switching, in a DIN-rail mountable format.
Each relay may be independently wired for normally-open (NO) or normally closed (NC) operation.
- 12 DMX controllable form-C switch closures
- Momentary or maintained operation
- DMX Present relay function
- DMX level display
- 6-channel alternate mode
- DMX-select mode, where DMX level corresponds to a triggered relay
- DMX start address easily set
- LED display and pushbuttons for configuration
- 2500V DMX input opto isolation
- 250V DMX fault protection
- End-of-line termination switch
- Status LEDs for power, DMX input, relay state
- Pluggable screw terminals for all connections
- DMX pass-thru connector
- Snap-on DIN rail housing
- DIN rail mounting section included
- Relays rated for minimum 100,00 operations at 2A at 30VDC
- 1500V opto-isolation between input and output ports
