Content Recording & Storage Systems : Related Content Recording & Storage : AJA Video - Ki Pro Rack

The Ultimate in Tape Replacement

The power of Ki Pro in a 1RU format, the perfect fit for broadcasters transitioning away from tape.

Series: Ki Pro Family

Model: Ki Pro Rack

Part #: KI-PRO-RACK-R0

Transition to file-based workflows
10-bit, full raster recording
RS-422 Control
Familiar controls and operation
Professional connections

View Manufacturers Website

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The power of Ki Pro in a 1RU format, the perfect fit for broadcasters transitioning away from tape.

Transition to file-based workflows
10-bit, full raster recording
RS-422 Control
Familiar controls and operation
Professional connections
Dual media drives
Ethernet file transfer
Integrated AJA hardware conversion
Remote configuration and control

Video Input: •Digital: 1 Channel, selectable input SD and HD-SDI (2xBNC), SMPTE-259/292/296 HDMI •Analog: SD/HD Component (3xBNCS): SMPTE/EBU N10, Betacam 525 line, Betacam 525J, YPbPr 12-bit A/D, 2x oversampling
Video Output (all simultaneously active): •Digital: SD and HD-SDI, SMPTE-259/292/296 (1xBNC) HDMI •Analog: Composite (1xBNC): NTSC, NTSCJ, PAL 12-bit D/A, 8x oversampling SD/HD Component (3xBNCs): SD: SMPTE/EBU N10, Betacam 525 line, Betacam 525J, RGB 12-bit D/A, 8x oversampling HD: YPbPr, RGB 12-bit D/A, 2x oversampling
Audio Input: •Digital: AES 24-bit, 8 channel, 48kHz (4xBNC) 24-bit SDI embedded audio, 8 channel, 48kHz HDMI embedded, 2 channel •Analog: 24-bit A/D, 2 channel balanced (2 XLR), 48kHz Input level: Line
Audio Output: •Digital: AES 24-bit, 8 channel, 48kHz (4xBNC) 24-bit SDI embedded audio, 8 channel, 48kHz HDMI embedded, 2 channel •Analog: 24-bit D/A, 2 channel balanced XLR, 48kHz
Network: •10/100/1000 Ethernet (RJ45) •Embedded webserver for remote control
Panel User Interface: •2 x 20 character display, with dedicated buttons
Timecode: •LTC timecode input and output via BNC •SDI embedded RP188 timecode •On-screen timecode display on SDI 2 output
Serial Port: •RS-422 (slave pinout), 9-pin (available beginning with version 2.0 firmware)‚ Connector pinout is as follows: 1 GND 2 TX - 3 RX + 4 GND 5 No Connection 6 GND 7 TX + 8 RX - 9 GND Shell GND
Hardware up conversion - 10-bit: •Anamorphic: full-screen •Pillar box 4:3: results in a 4:3 image in center of screen with black sidebars •Zoom 14:9: results in a 4:3 image zoomed slightly to fill a 14:9 image with black side bars •Zoom Letterbox: image zoomed to fill screen •Zoom Wide: combination of zoom and horizontal stretch to fill 16:9 screen; this setting can introduce a small aspect ratio change
Hardware down conversion - 10-bit: •Anamorphic: full-screen •Letterbox: image is reduced with black top and bottom added to image area with the aspect ratio preserved •Crop: image is cropped to fit new screen size
Hardware cross conversion - 10-bit: •1080i to 720P •720P to 1080i
Storage Module drive bays: •2 (each with eject button and select LED)
Physical: •Height: 1.75" (4.45cm) •Width: 19" (48.26cm) •Depth: 12.5" front panel to the back of the deepest connector (37.75cm)
Temperature: •Operating Temperature Range: 5C to 40C •Safe Storage Temperature Range (power OFF): -20C to 60C
Power: •Voltage: 100-240 VAC •Typical operating power: 40W

Ki pro family brochure 10442 kb - Brochure

Project List

Find a Dealer

Included in Case Studies

Good Run Research

in Richmond, VA, USA

by Code3AV Inc.

AJA Gear Greases the Wheels at Janta TV

in New Delhi, India

by AJA Video