Control Systems : External Sensors : AMX - CCD-OCR2B-P-WH

Wireless Occupancy/Vacancy Sensor

Model: CCD-OCR2B-P-WH

Part #: FG2606-41-WH

Clear Connect Enabled-Lutron's patented RF Technology uses a quiet band, essentially free of interference ensuring reliable communication between system devices
Vacancy Sensing-Automatically turn off the lights and when integrated with RMS turn off electronic appliances off when a person leaves the space
Occupancy Sensing-Turn lights on when a person enters a room and when integrated with RMS automatically turns on electronic appliances in the room
Simple Web Configuration-Browse to the NetLinx® Clear Connect Gateway URL to quickly setup the Clear Connect Switch

More Product Information Below

Compare

Project List

Product Info

Tech Specs

OVERVIEW

The Lutron Clear Connect CCD-OCR2B-P wireless occupancy/vacancy sensor automatically turns lights on when a person enters a room and turns lights off when the room is empty. As a battery powered (5-10 year battery life) and wireless device, the occupancy/vacancy sensor can be added to a Clear Connect System and be installed in any room without the need for wiring. When integrated with AMX's Resource Management Suite®, power to electronic appliances such as a projector or video conferencing system can be turned on or off based on occupancy. Available in a white ceiling mount configuration.

Clear Connect Enabled-Lutron's patented RF Technology uses a quiet band, essentially free of interference ensuring reliable communication between system devices
Vacancy Sensing-Automatically turn off the lights and when integrated with RMS turn off electronic appliances off when a person leaves the space
Occupancy Sensing-Turn lights on when a person enters a room and when integrated with RMS automatically turns on electronic appliances in the room
Simple Web Configuration-Browse to the NetLinx® Clear Connect Gateway URL to quickly setup the Clear Connect Switch

Sensor Type - Occupancy/Vacancy
Warranty - Yes

Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 32 F
Certifications: FCC
DC Voltage: 3 Volts
Power:
- Operating current: 20 µA nominal
- Requires two CR 123 lithium batteries
- 10-year battery life design
- Non-volatile memory (saved changes are stored during power loss)
Environmental:
- Operating Humidity: 0% to 90%, non-condensing
- Indoor use only
Sensor Coverage Test:
- Front accessible test button
- Lens illuminates orange in response to motion during test mode and is visible from 30 ft (9.1 m) Wireless Communication Test
- Front accessible test buttons
- Turn loads on and off
Timeout Options:
- 5 minutes
- 15 minutes
- 30 minutes
Auto-On Options (Occupancy Version Only):
- "Always"-Sensor turns lights ON and OFF automatically
- "Low light"-Sensor turns lights ON automatically only in low ambient light conditions. Sensor turns lights OFF automatically
- "Disable"-Lights must be turned ON manually from dimming or switching device. Sensor turns lights OFF automatically
Sensitivity Options:
- Low Activity
- Medium Activity
- High Activity
Color: White
Warranty (Length/Type): 3 Year Limited

Find a Dealer

Find a Distributor

Suggested Products

Low-Cost Smoke Detection Sensor – CE Approved

by Network Technologies Inc (NTI)

USB 4G Modem, TAA Compliant

by Network Technologies Inc (NTI)

Low-Cost Automatic Voice Dialer System, CE, Calls 6 Phone Numbers, 3 Input Channels, Powered

by Network Technologies Inc (NTI)