1.5GHz to 2.4GHz RF Vector Modulator

Model: AD8341

1.5GHz to 2.4GHz frequency range
Continuous magnitude control of ?4.5dB to ?34.5dB
Continuous phase control of 0° to 360°
Output third-order intercept 17.5dBm
Output 1dB compression point 8.5dBm

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The AD8341 is a high performance RF vector modulator that operates over an input frequency range from 1.5GHz to 2.4GHz. The part enables continuous and independent amplitude and phase adjustment capabilities. A complete 360° of phase adjustment and greater than 30dB of gain control is augmented through a broadband Cartesian I/Q interface. The I and Q interface offers a full power signal bandwidth of 230MHz which can be driven single ended or differentially, with a ±500mV full scale input.

The AD8341 is supplied in 24-lead LFCSP and fully specified over -40 to 85°C temperature range.

1.5GHz to 2.4GHz frequency range
Continuous magnitude control of ?4.5dB to ?34.5dB
Continuous phase control of 0° to 360°
Output third-order intercept 17.5dBm
Output 1dB compression point 8.5dBm
Output noise floor ?150.5dBm/Hz at full gain
Adjustable modulation bandwidth up to 230MHz
Applicable for:
- RF PA linearization/RF pre-distortion
- Amplitude and phase modulation
- Variable attenuators and phase shifters
- CDMA2000, GSM/EDGE linear power amplifiers
- Smart antennas

Demodulator/Modulator Signal Type - Audio
ROHS Compliant - Yes
Spec Sheet available - Yes

Maximum Frequency Response (Bandwidth): 2400000 kHz
Maximum Frequency Response (Bandwidth): 2400000000 Hz
Minimum Frequency Response (Bandwidth): 1500000 kHz
Minimum Frequency Response (Bandwidth): 1500000000 Hz
Impedance: 50 ohm
Current Draw: 0.15 Amps
DC Voltage: 5.25 Volts
ROHS Compliant: Yes

RF Vector Modulator 502 kb - Data Sheet

Project List

Request Quote

Find a Dealer

Suggested Products

IR Plus Combo - Includes: (1) IR M1 IR + Infrared Modulator / Wi-Fi Server, (1) IR E4 IR + Infrared emitter, and (1) IDP 008 ADA wall plaque. Replaces WIR TX925

by Williams AV

IR Plus Flex - Includes: (1) IR M1 IR + Infrared Modulator / Wi-Fi Server, (2) IR E4 IR + Infrared emitters, (1) MLB 003 metal linking bar, and (1) IDP 008 ADA wall plaque.

by Williams AV

IR Plus Combo with Dante - Includes: (1) IR M1 D IR + Infrared Modulator / Wi-Fi Server with Dante input supporting 2 channels, (1) IR E4 IR + Infrared emitter, and (1) IDP 008 ADA wall plaque.

by Williams AV