Displays & Monitors : Clocks & Clock Displays : Applied Technical Systems - AE4422-373

4-inch 6-digit Bar-segment Display, Run Time Accumulator

Series: AE

Model: AE4422-373

6-digit counter
4-inch bar-segment
Visible up to 200 feet away
Allows you to connect up to 40 remote displays
Standard signal types for RUN/HOLD and RESET include dry contacts from limit switches, proximity detectors or relays

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

Displays are available in 1, 2, 3, 4, 5, and 6 digit versions with digit sizes ranging from 1 inch high to 12 inches high. Standard signal types for RUN/HOLD and RESET include dry contacts from limit switches, proximity detectors, or relays; DC voltage signals from PLC's, TTL outputs (NPN or PNP) from instruments and detectors; and AC voltage signals from PLC's or other control equipment. The opto-isolated inputs allow the controls to be up to 1000 feet away from the display.

For multiple display systems, the Master/Driver Option (348) can be added. This option allows you to connect up to 40 remote displays to the AE Series Process Indicator for displaying the same ELAPSED TIME in many locations.

6-digit counter
4-inch bar-segment
Visible up to 200 feet away
Allows you to connect up to 40 remote displays
Standard signal types for RUN/HOLD and RESET include dry contacts from limit switches, proximity detectors or relays
2 years warranty

Clock Format - 24 Hour
Clock Type - Master
Warranty - Yes

Digit Height: 4 in
AC Voltage: 120 Volts
Active Power: 15 Watt
Depth: 3.50 in
Height: 6.10 in
Width: 20 in
Warranty (Length/Type): 2 Years
Number of Digit: 6
Inputs: RUN/HOLD and RESET inputs are opto-isolated for long wire hook-ups. They can be set up for a variety of signal types
Run/Hold Input: Elapsed time accumulates when this signal is applied. Elapsed time stops and holds when this signal is absent. Elapsed Time count resumes when this signal is re- applied. Counts up to 99:59:59 (HH:MM:SS) and rolls over to 00:00:00. Requires dry contact, DC voltage from 6 VDC to 120 VDC, or AC voltage from 12 VAC to 120 VAC, 3mA maximum
Reset Input: Resets elapsed time count to 00:00:00 when present. Requires dry contact, DC voltage from 6 VDC to 120 VDC, or AC voltage from 12 VAC to 120 VAC, 3 mA maximum. Duration must be reater than 20 msec. RESET overrides the RUN/HOLD input
Battery: Rechargeable NI-CAD battery back-up retains elapsed time count during power outages
Output: Optional 12 to 15Vdc, 100 mA output for sensor power

Applied_Technical_Systems_Catalog.pdf 6435 kb - Other

Project List

Find a Dealer

Suggested Products

9" Digital Clock Display

by Evertz

12" Digital Clock Display

by Evertz