DynamicShare is a system that allows users in a meeting room to share different video sources among each other without the need of technical knowledge and assistance. It is a software free and wireless free share system that provides a high level of security. The meeting or conference table can stand alone, without the need to integrate external devices. DynamicShare is a solution to optimise the cabling and the installation inside a conference or meeting table, allowing the signal to be distributed and shared through an HDMI loop that also embeds the control protocols of the monitors. It is available in 3 versions: DynamicShare standard for the signal distribution, selection and control, DynamicLoop for the signal distribution only, and DynamicShare stand-alone is a device for third party monitors and video display solutions.
AHDSS DynamicShare can be integrated into any Arthur Holm Dynamic (*) monitor allowing the daisy chain of the HDMI signal, the share, the selection and the control (AHnet). This board is integrated in the monitor so neither additional power supplies nor additional devices are needed. The loop needs to be closed (ring loop). A Maximum of 15 units can be daisy chained at Full HD resolution, 20 units at 720p resolution. The maximum distance between monitors is 5 meters. An HDBaseT extender kit is needed when the distance between the first and the last monitor is more than 5 meters. Available with and HDMI fixed connector integrated in the monitor’s cover plate of with a retractable HDMI cable.
AHDL DynamicLoop can be integrated into any Arthur Holm Dynamic (*) monitor allowing the daisy chain of the HDMI signal. This board is internally integrated so no additional power supplies are needed. The loop doesn’t need to be closed. A Maximum of 15 units can be daisy chained at Full HD resolution, 20 units at 720p resolution. The maximum distance between monitors is 5 meters.
AHDSSA External box to allow the connection of third party monitors and video display solutions in the loop. The loop needs to be closed (ring loop). A Maximum of 15 units can be daisy chained at Full HD resolution, 20 units at 720p resolution. The maximum distance between monitors is 5 meters. An HDBaseT extender kit is needed when the distance between the first and the last monitor is more than 5 meters. DynamicShare stand-alone can be integrated into DynamicShare standard loop. ...