Atlona HDVS transmitter wall plates were designed to smooth the transition from analog to digital displays in schools and businesses, allowing advanced HDMI display devices to be used with the many VGA computers still in use. HDBaseT and power over category cable (PoCc™) allow signal and power over a single category cable, with RS-232 control capability.
Analog to DigitalIdeal for schools, Atlona HDVS transmitter wall plates allow advanced HDMI displays to easily switch between HDMI sources (computers, Blu-ray players, or document cameras) and legacy VGA computers. In a simple system HDVS can function as a complete input and control module; as part of larger and more complex applications HDVS enables HDMI and VGA/analog audio input to larger HDMI/HDBaseT switchers.
Complete Control at Longer DistancesAtlona HDVS wall plates feature RS-232 projector control at distances up to 230 feet (70 meters). In a simple system using the HDVS-TX-WP and the RX, the display can be turned off and on from the wall plate. RS-232 commands must be programmed with easy-to-use, included software (requires computer with RS-232 output and basic knowledge of RS-232 command structure). When used in a larger and more complex system, it is compatible with major control systems.
- Select inputs automatically (based on last input used), front panel button, or by RS-232 control
- HDMI and VGA/analog audio on a single category cable up to 230 feet (70 meters)
- HDMI signal going to the display also supports embedded audio
- De-embedded, balanced 2-channel audio output at AT-HDVS-RX
- USB port for firmware update in the field
- Ships with both US and UK compatible wall plates for use around the world
- Note:HDBaseT allows up to 230ft (70m) of uninterrupted 1080p signal. Distances may vary based on installation and cable. Typical maximum distances are 230ft @ 1080p over CAT6a/7; 197ft @ 1080p over CAT5e/6; 130ft @ 4Kx2K over CAT5e/6T
- Suggested Receiver
AT-HDVS-RX - Atlona HDMI HDBaseT RX Scaler Box