Microphones : Instrument Microphones : Audio-Technica U.S., Inc. - AT4022

End-address omnidirectional condenser microphone for instruments (freq. response: 20-20,000 Hz

Series: 40

Model: AT4022

Outstanding performance and rugged construction, ideal for critical studio and live applications
High SPL handling and wide dynamic range
Flat, extended frequency response
Switchable 80Hz hi-pass filter and 10dB pad
Omnidirectional polar pattern provides maximum ambient pickup

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

The low-profile AT4022 omnidirectional condenser recording mic is outstanding for piano, acoustic guitar, and other acoustic instruments. With a flat, extended frequency response and wide dynamic range ideal for critical studio and live applications, the AT4022 handles high SPLs with ease. The microphones omnidirectional polar pattern preserves the sound of the recording location, delivers flat response and freedom from proximity effect. Its low-mass diaphragm improves transient response and reduces handling/mechanical noise transfer.

Outstanding performance and rugged construction, ideal for critical studio and live applications
High SPL handling and wide dynamic range
Flat, extended frequency response
Switchable 80Hz hi-pass filter and 10dB pad
Omnidirectional polar pattern provides maximum ambient pickup
Low self noise perfectly suited for digital recording equipment
Exceptional reproduction of low frequency sounds
Low-mass element for superb transient response

Microphone Connectivity - Wired
Microphone Type - Condenser
Polar/Pickup Pattern - Omnidirectional
Spec Sheet available - Yes

Maximum Frequency Response (Bandwidth): 20 kHz
Maximum Frequency Response (Bandwidth): 20000 Hz
Minimum Frequency Response (Bandwidth): 20 Hz
Minimum Frequency Response (Bandwidth): 0.02 kHz
Dynamic Range: 133 dB
Impedance: 250 ohm
Signal to Noise Ratio: 81 dB
Wireless: No
Current Draw: 0 Amps
DC Voltage: 48 Volts
Product Weight: 0.27 lbs
Noise: 13 dB
Warranty (Length/Type): 5 Years/Limited End-User
Low Frequency Roll-off: 80Hz, 12dB/octave
Sensitivity: -34 dB
Length: 5.67 in
Maximum Body Diameter: 0.83 in

AT4021 - End-address cardioid condenser microphone (Fixed-charge back plate, permanently polarized)

AT4040 - Side-address cardioid condenser microphone (freq. response: 20-20,000 Hz) (externally polarized)

AT4041 - Cardioid Electret Condenser Microphone

AT4047/SV - Cardioid Condenser Side-Address Microphone

AT4047MP - Side-address multi-pattern condenser microphone (freq. response: 20-18,000 Hz) (externally polarized)

AT4049b - Omnidirectional Condenser End-Address Microphone

AT4050 - Side-address multi-pattern studio condenser microphone (freq. response: 20-18,000 Hz) (externally polarized)

AT4050ST - Stereo Condenser Microphone (20-18,000 Hz frequency response)

AT4051b - End-address cardioid condenser microphone (externally polarized)

AT4053b - End-address hypercardioid condenser microphone (freq. response: 20-20,000 Hz) (externally polarized)

AT4080 - Bidirectional ribbon microphone, phantom powered (freq. response: 20-18,000 Hz)

AT4081 - Bidirectional ribbon microphone, phantom powered (freq. response: 30-18,000 Hz)

AT4022 Submittal Sheet 375 kb - Data Sheet

Project List

Find a Dealer

Find a Distributor

Suggested Products

e 901 - Instrument microphone (half-cardioid, condenser, boundary layer) for bass drums, piano & low-frequency instruments with 3-pin XLR-M. Includes (1) carrying pouch (2.4 oz)

by Sennheiser

e 904 - Instrument microphone (cardioid dynamic) with 3-pin XLR-M & 3/8" tripod thread. Includes (1) MZH 604 clip for drum rims & suspension mounts & (1) carrying pouch (4.4 oz)

by Sennheiser

Condenser Cardioid Instrument Microphone

by Electro-Voice