The VI-6 is a networked audio input expansion device allowing the user to add six channels of background music or user-configurable audio to a Vocia® system. It accepts four stereo analog inputs and two microphone/line level inputs, and provides six channels of digital audio output via CobraNet.® The VI-6 features embedded DSP and on-board memory to process and store all device-specific configuration information locally and includes comprehensive, fixed-chain digital-signal processing. As part of the Vocia system, the VI-6 meets paging requirements for facilities of all sizes.
Four sets of dual RCA connectors, plus terminal block
connectors for line-level inputs
Four control inputs and four control outputs
Two microphone/line inputs with phantom power
Software-configurable local audio signal processing, including gain, filters and compressor/limiter
Rotary switches for unit identification
CobraNet audio/control with dynamic use of available bundles, plus power over single Ethernet cable
Status LEDs to indicate signal and clip
CE marked and RoHS compliant
Covered by Biamp Systems’ warranty
Spec Sheet available - Yes
Height:
0.75 inches (44.5mm)
Width:
19 inches (483mm)
Depth:
10 inches (254mm)
Height:
0.75 inches (44.5mm)
Width:
19 inches (483mm)
Depth:
10 inches (254mm)
Line Inputs:
+ or - 1dB, 20Hz-20kHz
Mic/Line Inputs:
+ or - 1dB 35Hz to 20kHz
THD + N (20Hz to 8kHz):
Line Inputs:
<0.02%
Mic/Line Inputs:
<0.05%
Line Inputs Signal to Noise Ratio:
>84dB
Mic Inputs Equivalent Input Noise:
<-126dBu
Dynamic Range:
>100dB
Crosstalk (10kHz):
>75dB
Input Impedance:
Line Inputs:
>10k ohms
Mic/Line Inputs:
>1k ohms
Crosstalk (10kHz):
>75dB
Mic Inputs Phantom Power:
18V behind 3.3k ohms/leg
A/D Converters:
24-bit (48kHz sampling)
Control Inputs:
Type:
Digital, variable threshold
Max Input Threshold:
10V
Max Input Voltage:
12V
Min Input Threshold:
150mV
Input Impedance:
100k ohms
Control Outputs:
Type:
Form C Voltage free change over contact
Max Operating Voltage:
125VAC, 60VDC
Max Switching Capacity:
37VA
Min Operating Load:
10µA @ 10mV DC
Connection:
RJ45 with shielded Ethernet/PoE cable (CAT5, CAT5e, CAT6, or CAT7)
Power:
802.3af (PoE) Class 3
Height:
0.75 inches (44.5mm)
Width:
19 inches (483mm)
Depth:
10 inches (254mm)
Compliance: EU Directive 2002/95/EC: RoHS Directive CE marked EN 60849, AS 60849 verified: