hamburger-nav-icon
region-flag-icon
Search by Category
Audio
Cameras
Cases & Bags
Computers & Software
Conferencing
Content Management
Control
Displays
Furniture
Lighting & Studio
Mounts & Rigging
Networking & Cabling
Power
Presentation
Production
Security & Safety
Signal Management
Search by Category
EnglishFrenchGermanItalianPortugueseSpanish
Bogen Communications, Inc. - C10

Public Address Amplifier, 10W

Model: C10

  • Rear panel auxiliary receptacle
  • One dedicated MIC 1 input — Lo-Z balanced
  • One switchable MIC 2/AUX 1 input
  • Contact muting of AUX input
  • Transformer-isolated 600? telephone paging input
Compare
Project List
Product Info
Tech Specs
Documents
The public address amplifier shall provide simultaneous mixing of two low-impedance balanced microphones and one telephone input; or one microphone, one auxiliary input, and one telephone input. The unit shall have a front panel selector switch which shall allow one of the input channels (MIC 2/AUX) to be selected for use as a microphone or an auxiliary input. It shall be possible to mute the auxiliary input when a customer-supplied SPST switch is attached to the AUX MUTE terminals on the rear panel. The TEL input shall provide signal-activated paging with muting of the AUX channel. A VOX threshold control shall be included to eliminate activation of the channel by noise on the telephone line. The threshold control and TEL volume control shall be located on the rear panel.
  • Rear panel auxiliary receptacle
  • One dedicated MIC 1 input — Lo-Z balanced
  • One switchable MIC 2/AUX 1 input
  • Contact muting of AUX input
  • Transformer-isolated 600? telephone paging input
  • Separate rear panel-mounted TEL volume control
  • Voice-activated muting of AUX input by TEL input
  • Variable trigger threshold for voice activation
  • Optional wall mount kit
  • Optional impedance matching transformer 10k/600 ohm
 
Request Quote
 

Suggested Products

by Bosch Conferencing and Public Address Systems