The CS2200-CP is an extremely versatile system clocking device that utilizes a programmable phase lock loop. The CS2200-CP is based on an analog PLL architecture comprised of a Delta-Sigma Fractional-N Frequency Synthesizer. This architecture allows for frequency synthesis and clock generation from a stable reference clock. The CS2200-CP supports both I²C and SPI for full software control. The CS2200-CP is available in a 10-pin MSOP package in Commercial (-10°C to +70°C) and Automotive (-40°C
to +85°C) grades.
Delta-Sigma Fractional-N Frequency Synthesis
Generates a Low Jitter 6 - 75 MHz Clock from an 8 - 75 MHz Reference Clock
Highly Accurate PLL Multiplication Factor
Maximum Error Less Than 1 PPM
I²C™ / SPI™ Control Port
Configurable Auxiliary Output
Buffered Reference Clock
PLL Lock Indication
Duplicate PLL Output
Flexible Sourcing of Reference Clock
External Oscillator or Clock Source
Supports Inexpensive Local Crystal
Minimal Board Space Required
No External Analog Loop-filter Components
Available in Tape and Reel (CS2200CP-CZZR)
Operating Temperature (Maximum):
158 F
Operating Temperature (Minimum):
14 F
Power Supply:
3.3 V
Reference Frequency Range:
8 to 56 MHz
Output Frequency Range:
6 to 75 MHz
Package:
10 MSOP
DC Power Supply (Absolute Maximum Rating) Max:
6 V
Input Current (Absolute Maximum Rating) mAX:
±10 mA
Digital Input Voltage (Absolute Maximum Rating) Max:
VD + 0.4 V
Ambient Operating Temperature (Power Applied) (Absolute Maximum Rating):
-55 to 125 °C