hamburger-nav-icon
region-flag-icon
Search by Category
Audio
Cameras
Cases & Bags
Computers & Software
Conferencing
Content Management
Control
Displays
Furniture
Lighting & Studio
Mounts & Rigging
Networking & Cabling
Power
Presentation
Production
Security & Safety
Signal Management
Search by Category
EnglishFrenchGermanItalianPortugueseSpanish
Cirrus Logic, Inc. - WM2002
Request Quote

2-channel Stereo Headphone Driver with Cirrus Logic Ambient Noise Cancelation

Model: WM2002

  • Cirrus logic active noise cancelation (ANC)
  • Greater than 30dB (peak), 25dB (typical) ambient noise reduction
  • Wide noise cancelation bandwidth (40Hz to 4kHz)
  • Up to 3 banks of ANC coefficients can be programmed to support different operating conditions
  • Up to 10 analog noise cancelation microphones
Compare
Project List
Product Info
Tech Specs
Documents
The WM2002 is a low power, high-quality stereo headphone driver, delivering Cirrus Logic’s patented ambient noise cancelation. The WM2002 supports analog playback or voice input, and analog microphones for noise cancelation. Designed for incorporation within a stand-alone headset or headphone, the Cirrus Logic ANC noise cancelation engine performs ambient noise cancelation during a voice call or during music playback. The WM2002 provides integrated power management, comprising a DC-DC converter, charge pump and LDO regulators. Different power supply configurations can be supported, including operation from a single cell AAA or AA battery, and other configurations using externally regulated supplies. System clocking is achieved using a crystal-controlled on-chip oscillator. An external clock can be connected directly, if available. The WM2002 is configured using programmable settings stored in an integrated non-volatile memory. The configuration stored in the OTP memory is enabled automatically at start-up. If required, the WM2002 can also be configured using register control accessed using a two-wire serial control interface.
  • Cirrus logic active noise cancelation (ANC)
  • Greater than 30dB (peak), 25dB (typical) ambient noise reduction
  • Wide noise cancelation bandwidth (40Hz to 4kHz)
  • Up to 3 banks of ANC coefficients can be programmed to support different operating conditions
  • Up to 10 analog noise cancelation microphones
  • 2 single-ended or 1 differential line input per channel
  • Headphone driver (LDO4VOUT = 1.8V)
  • 45mW per channel into 16-ohm load
  • 22mW per channel into 32-ohm load
  • Single-ended or differential (BTL) drive configuration
  • -82dB THD+N for differential (BTL) drive
  • Integration
  • On-chip DC-DC boost converter, charge-pump and LDOs
  • Flexible power supply options, including single cell battery (1 x AAA battery)
  • Internal crystal oscillator
  • Miscellaneous
  • Monitor pin to select mute/talk-through modes
  • LED driver
  • Tone generator for audible status indication
  • Pop and click noise protection circuit
  • RFI suppression
  • 48-pin QFN package (7 x 7 x 0.75mm, 0.5mm pitch)
 
Request Quote
 

Suggested Products