PoE Microphone Pod with support for DM NAX Intelligent Audio

Model: DM-NAX-POD-MIC

A tabletop 12-element array microphone for small to large room conferencing solutions
Convenient in-call volume and mic mute controls
LED indicator ring displays operational status
Built-in automatic gain control and automixing balances each microphone in the internal array to provide optimal signal levels while reducing extraneous noise
Connects via network to a DM-NAX-AP-100 Intelligent Audio processor, which sends and receives audio to a BYOM computer via a USB-C® connection

View Manufacturers Website

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The DM-NAX-POD-MIC is a tabletop microphone pod for unified communications and commercial audio applications.

DM NAX® Audio-over-IP Capable

The DM-NAX-POD-MIC connects to a dedicated audio-over-IP network to pair with a DM-NAX-AP-100 Intelligent Audio processor (sold separately) and other microphone or speaker pods.

The processor automatically configures the necessary audio routing and level adjustments once it is paired with one or more pods and/or speakers. Pairing the DM-NAX-POD-MIC with DM NAX audio devices allows for encrypted unicast audio-over-IP streaming.

Microsoft Teams® Certified Conferencing Solution

When used in combination with the DM-NAX-AP-100 Intelligent Audio processor, the DM-NAX-POD-MIC is part of a Microsoft Teams certified conferencing solution. This allows the Intelligent Audio processor to be selected as the audio interface for a BYOM device running Microsoft Teams.

Capacitive Call and Volume Buttons

The top surface of the DM-NAX-POD-MIC features back-lit capacitive buttons for microphone mute control as well as call pickup and hangup functions for a connected BYOM device.

A tabletop 12-element array microphone for small to large room conferencing solutions
Convenient in-call volume and mic mute controls
LED indicator ring displays operational status
Built-in automatic gain control and automixing balances each microphone in the internal array to provide optimal signal levels while reducing extraneous noise
Connects via network to a DM-NAX-AP-100 Intelligent Audio processor, which sends and receives audio to a BYOM computer via a USB-C® connection
Power over Ethernet (PoE) network powered

Spec Sheet available - Yes

Operating Temperature (Maximum): 104 F
Operating Temperature (Minimum): 41 F
Depth: 4.70 in
Height: 1.30 in
Width: 4.70 in
Color: Black
COMMUNICATIONS:
•Ethernet: For control and PoE, AoIP, and/or console, 100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP
Microphones:
•Microphones: 360° 12-element array
•Pickup Radius: 7.5 ft (2.3 m)
Audio:
•DSP: Acoustic echo cancellation, automatic gain control, dynamic noise suppression, and speaker volume control Full-duplex IEEE 1329 Type 1 compliant
Connectors:
•LAN 1 (PoE+): (1) 8-pin RJ-45 connector, female; 100BASE-TX/1000BASE-T Ethernet port; PoE+ PD (powered device) port; IEEE 802.3at Type 2 PoE Class 4 (25.5 W) compliant; Compatible with PoE+ compliant Ethernet switch or third-party PoE+ PSE; Dedicated for Audio-over-IP traffic only
Controls and Indicators:
•Mic Mute: (1) Button, capacitive, backlit, mutes or unmutes internal microphone; (1) Bicolor red/green LED, indicates whether microphone is muted or unmuted
•Volume Level: (2) Buttons, capacitive, backlit, increase (+) or decrease (-) speaker volume level; (5) White LEDs, indicate current speaker volume level
•Status Ring: (1) Multicolor LED ring on top panel, indicates status conditions such as pairing, updating, or errors
•RESET: (1) Push button: Pressing and holding the RESET button for 15 seconds with power supplied clears network settings and restores the default DHCP mode; To perform a factory restore, press and hold the RESET button with power disconnected, then connect the power supply and continue to hold the RESET button for 30 seconds
Power: PoE+: IEEE 802.3at Class 4 (25.5 W) compliant; Compatible with IEEE 802.3at compliant Ethernet switch or third-party PoE+ compliant PSE
Humidity: 10% to 95% RH (noncondensing)
Construction:
•Enclosure: Lightly textured black finish, plastic housing, perforated stainless steel grilles, and die-cast aluminum bottom cover
•Mounting: Tabletop mounting only

Mic 5884533 kb - Data Sheet

Project List

Find a Dealer

Crestron Electronics, Inc.
15 Volvo Drive
Rockleigh, NJ 07647
United States
201-767-3400

Contact in regards to this product:

Crestron Electronics, Inc.

Model: DM-NAX-POD-MIC