Signal Routing / Switching : Related Signal Routing / Switching Products : Crestron Electronics, Inc. - DMB-I-S2

8-channel DigitalMedia 8G Single-mode Fiber Input Blade for DM Switchers

Series: DigitalMedia

Model: DMB-I-S2

Part #: 6506005

Modular input blade for a DM-MD64X64 or DM-MD128X128 switcher
Provides eight independent DM 8G® Single-Mode Fiber inputs
Supports cable lengths up to 7.5 miles (12 km) using CresFiber® 8G SM or G.652.D single-mode fiber [1]
Handles video resolutions up to Full HD 1080p
Handles computer resolutions up to WUXGA

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

Accessories

The DMB-I-S2 is an input blade designed for use with any blade based Crestron® DigitalMedia Switcher. It provides eight independent DM 8G® SM Fiber inputs. Each DM 8G SM Fiber input enables the connection of a DM 8G SM Fiber Transmitter, or the output of another DM® switcher. Just one single-mode fiber optic strand is required per input, supporting distances up to 7.5 miles (12 km) using CresFiber® 8G SM or G.652.D single-mode fiber optic cable.

Modular input blade for a DM-MD64X64 or DM-MD128X128 switcher
Provides eight independent DM 8G® Single-Mode Fiber inputs
Supports cable lengths up to 7.5 miles (12 km) using CresFiber® 8G SM or G.652.D single-mode fiber [1]
Handles video resolutions up to Full HD 1080p
Handles computer resolutions up to WUXGA
Handles 3D video and Deep Color
Handles Dolby® TrueHD, DTS-HD®, and uncompressed 7.1 linear PCM audio
HDCP compliant
Occupies a single output blade slot

Product Weight: 1.60 lbs
Regulatory Compliance: HDCP
Video:
- Input Signal Type: DM 8G® SM Fiber (DigitalMedia™ over one single-mode fiber optic strand)
- Formats: DM 8G SM Fiber w/Deep Color & 3D, HDCP content protection support
- Input Resolutions, Progressive: 640x480@60Hz, 720x480@60Hz (480p), 720x576@50Hz (576p), 800x600@60Hz, 848x480@60Hz, 852x480@60Hz, 854x480@60Hz, 1024x768@60Hz, 1024x852@60Hz, 1024x1024@60Hz, 1280x720@50Hz (720p50), 1280x720@60Hz (720p60), 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1365x1024@60Hz, 1366x768@60Hz, 1400x1050@60Hz, 1440x900@60Hz, 1600x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, 1920x1080@24Hz (1080p24), 1920x1080@25Hz (1080p25), 1920x1080@50Hz (1080p50), 1920x1080@60Hz (1080p60), 1920x1200@60Hz, 2048x1080@24Hz, 2048x1152@60Hz, plus any other resolution allowed by HDMI up to 165MHz pixel clock
- Input Resolutions, Interlaced: 720x480@30Hz (480i), 720x576@25Hz (576i), 1920x1080@25Hz (1080i25), 1920x1080@30Hz (1080i30), plus any other resolution allowed by HDMI up to 165MHz pixel clock
Audio:
- Input Signal Type: DM 8G SM Fiber
- Formats: Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio™, up to 8ch PCM
COMMUNICATIONS:
- DigitalMedia: DM 8G Fiber, HDCP, EDID, CEC, Ethernet
Indicators:
- ACT: (1) green LED, indicates blade activity
- MSG: (1) red LED, indicates an error message has been generated
- INPUT MMF/SC: (8) green LEDs, indicate DM link status for each corresponding input
NOTES:
- The maximum cable length for DigitalMedia 8G Single-Mode Fiber (DM 8G SM Fiber) is 7.5 miles (12 km) using Crestron CRESFIBER8G-SM or third-party G.652.D (or better) single-mode fiber optic cable. Refer to the Crestron DigitalMedia Design Guide, Doc. #4546 for complete system design guidelines. All wire and cables are sold separately.

DM-MD64x64-DMB-4K-I-C - 64 x 64 DigitalMedia Matrix Switcher

DM-MD64x64-DMB-4K-O-C - 64 x 64 DigitalMedia Matrix Switcher

DMC-4KZ-HD-DSP - 4K60 4:4:4 HDMI HDR Input Card with Downmixing for DM Switchers

Input Blade 422 kb - Data Sheet

Project List

CRESFIBER8G-SM-CONN-LC-12
CresFiber 8G Single-Mode Fiber Optic Cable Connector, LC, 12-Pack

CRESFIBER-TK
CresFiber® Termination Kit (AFL Telecommunications®)

Find a Dealer