The DMC-CATO-HD is an output card designed for use with any card-based Crestron® DigitalMedia Switcher. It provides two independent DM® CAT outputs, plus one HDMI® output. The HDMI output carries the same signal as the first DM CAT output. Each DM CAT output enables connection to a DM CAT Receiver, a V-Panel touch screen display, or the input of another DM switcher, using DigitalMedia cable.[1]
All outputs on the DMC-CATO-HD are capable of handling video resolutions up to Full HD 1080p, as well as computer resolutions up to WUXGA. DM CAT transports uncompressed high-definition video and computer signals over distances of 50 to 450 feet (15 to 137 m) using Crestron DigitalMedia Cable and up to two DigitalMedia CAT Repeaters.[1]
Receivers connected to the DMC-CATO-HD are powered via DMNet power, which is furnished by the DM switcher over the DMNet cable contained within the DigitalMedia cable. Each DMNet cable connects to a DMNet port located on the switchers rear panel.[2]
To configure a DM switcher complete with input and output cards, cables, and other peripherals, please use the online DigitalMedia Switcher Configuration Tool.
Are you upgrading an existing DM switcher that has older multi-gang DMCO-series output cards- Use the online Output Card Additions and Upgrades Tool to update your existing output cards and switcher to the new single-gang output card format.
- Modular output card for a DM-MD8X8, DM-MD16X16, or DM-MD32X32 switcher
- Provides two independent DM® CAT outputs
- Supports cable lengths of 50 to 450 feet (15 to 137 m) using Crestron DM Cable and up to two DM CAT Repeaters [1]
- Includes a parallel HDMI® port on the first output
- Handles video resolutions up to Full HD 1080p
- Handles computer resolutions up to WUXGA
- Handles 3D video and Deep Color
- Handles Dolby® TrueHD, DTS-HD®, and uncompressed 7.1 linear PCM audio
- HDCP compliant
- Occupies a single output card slot