Crestron Green Light® Dimmable LED Drivers are constant current LED driver with multiple LED outputs that are controlled over a single channel. The LED drivers provides high-power, dimmable, LED lighting with a 0-100% dimming range. Operable between 120 and 277 Volts, the LED drivers are perfect for any building in any part of the world. Crestron Green Light Dimmable LED Drivers are available in 50W and 100W DALI and 50 and 100W 0-10V compatible models.
DALI or 0-10V compatible
Superior, smooth dimming technology using a combination of duty-cycle and current dimming
Smooth dimming from 100% to 0%
Linear or logarithmic dimming curve
High efficiency over a wide power and voltage range
Programmable LED current per output
Standby Power:
<0.5 Watt
Certifications:
CE; UL: Recognized Component for US and Canada according to UL1310 and UL8750; US: Class 2 output; Canada: Non-Class 2 output; IEC 61347-1, IEC 61347-2-13, IEC 62384 + A1, EN 55015 + A1, EN 55022 + A1, IEC 61000-3-2, IEC 61547 + A1, IEC 62386-101/102/207; FCC: Title 47CFR Part 15 Class B
INPUT:
Voltage:
120-277 Volts AC
Frequency:
50/60 Hz
Current (50W models):
0.7 Amp maximum
Current (100W models):
1.05 Amps maximum @ 120V/60Hz; 0.5 Amp maximum @ 230V/50Hz; 0.45 Amp maximum @ 277V/60Hz
Output:
Number of Class 2 LED Outputs:
Single-channel 50W models = 2; Single-channel 100W models = 4; 2-channel 50W models = 1 per channel; 2-channel 100W models = 2 per channel
Number of Dimming Channels:
1 or 2 depending on model
Voltage (50W models):
55 Volts typical
Voltage (100W models):
57 Volts typical, 60 Volts maximum
Power (50W models):
50 Watts maximum
Power (100W models):
100 Watts maximum
Current Range:
configurable from 200 mA to 1050 mA per output
Current Accuracy:
±5%
Dimming:
Type:
Constant current
Range:
0-100%
Curve:
configurable for linear or logarithmic
Control Interface:
DALI® or 0-10V (current sink and current source compatible) depending on model
Surge protection (100W models):
3 kV L to N, 4 kV L/N to ground
Efficiency (50W models):
89% at full load, =85% above 67% load
Efficiency (100W models):
90% at full load, =87% above 50 Watt output
Power Factor (50W models):
>0.9
Power Factor (100W models):
>0.94
THD (50W models):
<17% at full load
THD (100W models):
<10% at full load
Thermal Management:
Supports LED temperature feedback using 47k Ohm NTC thermistor (not included)
Configurable Parameters (via CREScode™):
Output current (per LED output), dimming curve, minimum dimming level, NTC temperature
Connections:
INPUT 120-277V:
(1) 3-position pushbutton terminal block for Line, Neutral and Ground
DALI (DALI models only):
(2) 2-position pushbutton terminal blocks for interface to DALI bus
0-10V (LV models only):
(1) 2-position pushbutton terminal block for 0-10V control input
OUTPUT 1 – 2 (50W models):
(2) 2-position pushbutton terminal blocks for LED outputs:
OUTPUT 1 – 4 (100W models):
(4) 2-position pushbutton terminal blocks for LED outputs
CREScode/NTC:
(1) 2-position pushbutton terminal block for interface to CREScode configuration tool during factory setup, and for 47k Ohm NTC thermistor during operation
Note: All terminal blocks accommodate 20 to 16 AWG (0.5 to 1.5 mm2) solid or stranded copper conductors:
Environmental:
Temperature Range (50W models):
-4° to 122°F (-20° to 50°C)
Temperature Range (100W models):
-40° to 122°F (-40° to 50°C)
Maximum Tc (50W models):
185°F (85°C)
Maximum Tc (100W long case models):
185°F (85°C)
Maximum Tc (100W short case models):
181°F (83°C)
Life expectancy:
50,000 hours at or below maximum rated ambient temperature
MTBF:
480,000 hours
Enclosure:
Metal, painted
Dimensions:
50W Long Case Dimensions:
Height: 1.18 in (30 mm); Width: 17.48 in (444 mm); Depth: 0.83 in (21 mm)
50W Short Case Dimensions:
Height: 2.99 in (76 mm); Width: 5.12 in (130 mm); Depth: 1.18 in (30 mm)
100W Long Case Dimensions:
Height: 1.61 in (41 mm); Width: 14.57 in (370 mm); Depth: 1.18 in (30 mm)
100W Short Case Dimensions:
Height: 3.15 in (80 mm); Width: 9.06 in (230 mm); Depth: 1.18 (30 mm)