With just a glance down the hallway, the SSC provides highly-visible indication of a room’s availability as part of a complete Crestron® enterprise room scheduling solution. Its stylish appearance and vivid color illumination complement any corporate office environment. The two-sided, clear acrylic sign face glows bright green or red to indicate room availability. The sign face is custom engravable with the room number, name, or other designation. The complete sign assembly mounts to a cutout in a drywall or drop-tile ceiling.
Room Availability Status
For room scheduling applications, the SSC simply connects to a Crestron TSW-760 or TSW-1060 touch screen via USB. No special programming or configuration is required. The sign color is controlled by the room scheduling application, which runs on the touch screen and syncs with the Crestron Fusion® Enterprise Management Service. The sign illuminates green when the room is available and red when the room is occupied.
Custom RGB Color Mixing
For custom applications, the SSC can be programmed to illuminate in any desired color. Its tri-color RGB LEDs allow for a full spectrum of colors by blending the red, green, and blue elements in 1% increments per color. Custom RGB color mixing requires the SSC to be connected to a Crestron control system via Cresnet®. The control system can be programmed to support all types of functionality, enabling colors to alternate, fade in and out, or blink on and off as desired.
Custom Engraving
The SSC is available with or without custom engraving. The engraving appears on both sides of the acrylic sign face to identify the room by name or number. When illuminated, the engraving is clearly visible at a distance of 50' or 15m. Engraving can be changed at any time by purchasing a replacement sign face (model SSC-ACR).
Simple Installation
Installing the SSC is simple. It mounts to a drywall or drop-tile ceiling through a 2x10.4" (51x264mm) cutout using four dog-leg mounting clamps integrated into the unit. Power and communications are supplied by a single USB or Cresnet wire. For typical room scheduling applications, a fifteen foot (4.57m) plenum-rated USB cable is included, which connects to the wall-mounted touch screen nearby. For custom applications, a Cresnet cable can be run to a control system up to 3000' (914m) away.
