It really is a feature-packed IP gateway. You'll get full VLAN support, tolerance to any input packet distribution, flexible routing, sophisticated synchronising with a choice of timing sources including PTP, ten frames of video delay, unicast and multicast transmission support and both SDI and IP status monitoring. Plus it's future-proof – when this functionality is no longer required you can simply install a different low-cost app on your MARBLE-V1 hardware.
- Software app that runs on the MARBLE-V1 media processor
- De-encapsulates SDI from 10GbE IP networks
- Supports SMPTE ST 2022-6 and ST 2022-7 protocols
- Converts to six HD/SD or three 3Gb/s SDI output connections, with flexible assignment of the converted flows from either of the two input 10GbE IP network interfaces
- Second 10GbE network interface can be configured for SMPTE ST 2022-7 redundant input streaming
- Tolerant of any input packet distribution
- Supports 31 SDI video standards
- Full range of VLAN support
- Unicast and multicast transmission support
- SDI sources synchronised to common reference timing source prior to output switches for clean switching of input flows to the SDI outputs
- Choice of multiple timing sources with fail-over: PTP and two analogue Black and Burst or tri-level syncs references via Vision frame
- Know your signal is present and valid, thanks to signal monitoring and fault detection
- IP flow monitoring including packet loss, duplicated packets and packet delay variation
- Inputs and outputs accessed by using an appropriate rear module (VR06)
- Housed in Vision rack frames
- Space-saving: MARBLE-V1 media processor is a ‘double slot’ 96mm x 325mm card, with up to ten MARBLE-V1 fitting in 3U
- Flexible control and monitoring: frame integrated control panel, VisionPanel remote control panel, SNMP, ASCII and JSON protocols or the web browser-based VisionWeb Control
