The PUV-662PL-4K22 HDMI/HDBaseT Matrix supports the transmission of video (resolutions up to 4K2K at 60Hz, HDCP 2.2, HDMI2.0) and multi-channel digital audio from 6 HDMI sources to 6 HDBaseT Lite outputs and 2 independent HDMI2.0 outputs. The HDBaseT outputs allow transmission via a single CAT5e/6/7 cable up to 60m, whilst the independent HDMI outputs support cable lengths of up to 10m. This matrix supports high resolution digital audio formats such as LPCM 7.1CH,Dolby TrueHD, Dolby Digital Plus, Dolby Atmos and DTS-HD Master Audio as well as 3D video content.
The PUV-662PL-4K22 matrix incorporates an independent audio matrix with 8 audio outputs and 4 audio inputs. These outputs and inputs can be used for de-embedding HDMI audio to feed the audio outputs and embedding this audio to the HDBaseT and HDMI outputs. In addition, volume, mute, treble, bass and audio lip-sync correction control are available on all direct audio outputs. Optical Audio Return (OAR) Technology allows the optical input on the PUV-1230PL-RX receiver to be routed back to the audio matrix.
- HDMI 2.0, HDCP1.4 and HDCP2.2 compliant
- Routes six HDMI sources to eight displays using six HDBaseT outputs and two independent HDMI outputs
- High-Definition video and audio, PoH (Power over HDBaseT) and control (Bi-Directional IR and RS-232 pass through)
- Supported HDBaseT resolutions: VGA~WUXGA, 480i~1080p, 4K UHD at 24/25/30Hz (RGB 4:4:4 and YUV 4:2:2), 4K UHD at 60Hz (YUV 4:2:0), 4K/2K at 24/25/30Hz (RGB 4:4:4 and YUV 4:2:2) and 4K/2K at 60Hz (YUV 4:2:0) dependent upon the output display’s EDID settings
- Supports resolutions up to 4K at 60 (RGB 4:4:4) on HDMI output ports
- Supports automatic 4K at 60 RGB 4:4:4 to YUV 4:2:0 conversion for HDBaseT outputs
- 4K/2K and 4K UHD signals can be transmitted up to 35m via CAT5e/6 and 40m via CAT6a/7
- Supports pass-through of HD audio formats: LPCM 2/5.1/7.1CH, Dolby Digital 2/5.1CH, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos and DTS-HD Master Audio
- Supports audio matrix functionality enabling full audio management of the system including HDBaseT audio zone selection, and fully independent audio only zones
- Supports Digital to Analogue Conversion (DAC) and Analogue to Digital Conversion (ADC) for audio integration
- Supports Volume, Mute, Treble, Bass, and Audio delay for lip-sync on direct audio outputs
- Optical Audio Return (OAR)
- Advanced internal and external EDID management with 4 sets of configurable EDID settings
- Internal test pattern generation for self-testing and sink device testing. (Internal test patterns up to and including 4K signals)
- Supports HDCP repeating and CEC functions
- Control is via RS-232, remote control, on-panel control and IP Control (Telnet and Web GUI)
- 2U rack mounted design
