The N/D868 is truly a top performer in any application.
Whether in a live sound or studio environment, the N/
D868 is able to handle incredibly high sound pressure
levels without distortion or overriding the input mixer.
With a response specifically designed to “kick” the N/
D868 can be used “as is”—no additional EQ required.
Electrovoice was the first to utilize the neodymium
magnet structure, and it remains at the heart of our new
N/DYM series of microphones. Experience the leader
again for the first time and hear the difference.
Operation
The low frequency response of the N/D868 microphone
varies with the distance from the sound source. Known
as “proximity effect,” maximum bass response is
produced in “close-up” use with the microphone 1/4
inch from the sound source. Normal bass response is
experienced with working distances greater than 24
inches.Working close to the microphone will produce a
more robust sound. Close up positioning of the
microphone will also reduce the potential for feedback
from the sound reinforcement system. Then, the bassboost
provides an increase in overall microphone output
level.The mixer gain may be proportionately reduced,
resulting in a reduction of the system’s sensitivity to
feedback caused by sound entering the microphone
from the loudspeakers.
Designed specifically for kick drum applications
in live or studio environments
Optimized sensitivity for the high sound
pressure levels found in bass drum micing
Extended low-frequency response
No additional EQ required
Rugged steel construction for exceptional
Durability
Microphone Applications:
Guitar Amp, Kick Drum, Tom
Polar/Pickup Pattern - Cardiod
Microphone Type - Dynamic
Microphone Connectivity - Wired
Element:
Dynamic
Polar Pattern:
Cardioid
Impedance, Low-Z balanced:
150 Ohms
connector type:
3-pin XLR
Open Circuit Voltage:
1 mV/Pascal
Frequency Response:
20 - 10,000 Hz Near Field
MIC type:
Instrumental
Wired/Wireless:
Wired
Finish:
Non-reflecting Black
Case Material:
Metal
Weight Net:
295 g ( 10.41 oz )
Dimensions (Height X Max Diameter):
133 x 60 mm (5.24" x 2.36")