CEM3 Processor

Model: CEM3 processor

16 bit-control for smooth continuous fades on fast-acting loads
10 standard curves; non-dim; custom curves; independently set per circuit
Supports DMX512A (ANSI E1.11-2008), sACN (streaming ACN, ANSI E1.31), and Net3 (ACN ANSI E1.17) protocols
Up to 16 presets per space; racks can be split into multiple spaces
Up to eight universes can be patched, with six sources per universe

More Product Information Below

Compare

Project List

Product Info

Tech Specs

The CEM3 (Control Electronic Module 3) platform serves as a system-management dashboard for each operator of an FDX3000 system, anywhere in your facility. With support for up to six sources across eight universes, CEM3 provides feedback to unlimited remote devices. It also simplifies the setup of a power control rack and runs your system smoothly. CEM3 offers ultra-smooth 16-bit dimming resolution, as well as line-disturbance immunity, so your system is protected from voltage and frequency fluctuations. It’s any-phase power supply allows the controller to continue running when one or two of its three phases is lost.

16 bit-control for smooth continuous fades on fast-acting loads
10 standard curves; non-dim; custom curves; independently set per circuit
Supports DMX512A (ANSI E1.11-2008), sACN (streaming ACN, ANSI E1.31), and Net3 (ACN ANSI E1.17) protocols
Up to 16 presets per space; racks can be split into multiple spaces
Up to eight universes can be patched, with six sources per universe
Each circuit can be addressed to any streaming ACN address across a maximum of four universes within a single rack
12 Ethernet-based sources simultaneously at the same priority
Three data-loss options: wait and fade out, fade to preset or hold last look
User interface has a graphical backlit display, two DMX input ports (highest takes precedence), a front USB port for saving configuration data or firmware updates and a temperature sensor
German, English, Spanish or French language settings, with support for language file upload
Circuit monitoring for feedback of set/actual value state to ETC consoles

AC Voltage (Maximum): 265 Volts
AC Voltage (Minimum): 100 Volts

Request Quote

Find a Dealer

Suggested Products

Xtend XPC Standalone Power Controller

by LynTec

3-phase 4-wire 208Y/120V Modular Sequencing Panelboard with 41 Circuits, 24 Controlled Circuits

by LynTec

3-phase 4-wire 120V Modular Sequencing Load Center with 41 Circuits

by LynTec