hamburger-nav-icon
region-flag-icon
Search by Category
Audio
Cameras
Cases & Bags
Computers & Software
Conferencing
Content Management
Control
Displays
Furniture
Lighting & Studio
Mounts & Rigging
Networking & Cabling
Power
Presentation
Production
Security & Safety
Signal Management
Search by Category
EnglishFrenchGermanItalianPortugueseSpanish
Electronic Theatre Controls Inc. - FDX3000 Power Control System
Request Quote

Power Control System

Model: FDX3000 Power Control System

  • 19-inch steel frame with side walls and rear wall
  • Sub-rack with output stages and dimmer processors mounted on swing frame; individual plug-in dimmers and processors can be replaced easily
  • Maximum of 2 CEM3 processors (redundancy) and 96 dimmers 2.5kVA (72 with RCBO), or 48 dimmers 5kVA, or 24 dimmers 10kVA, or mixed on request
  • Approximately 3kVA when all circuits are at full
  • 16 bit-control for smooth continuous fades on fast-acting loads
Compare
Project List
Product Info
Tech Specs
The FDX3000 power control system combines the best of ETC and Transtechnik's market leading technology. It brings together proven German engineering for the dimmer rack, cooling system and power stage, and provides the highest degree of smooth dimming and fast changeover.
  • 19-inch steel frame with side walls and rear wall
  • Sub-rack with output stages and dimmer processors mounted on swing frame; individual plug-in dimmers and processors can be replaced easily
  • Maximum of 2 CEM3 processors (redundancy) and 96 dimmers 2.5kVA (72 with RCBO), or 48 dimmers 5kVA, or 24 dimmers 10kVA, or mixed on request
  • Approximately 3kVA when all circuits are at full
  • 16 bit-control for smooth continuous fades on fast-acting loads
  • 10 standard curves; non-dim; custom curves; independently set per circuit
  • Low-noise rack operates at less than 55dBA at a distance of 1m
  • 16-120 mm2 power input lugs (2 x 16-120mm2 or 95-250mm2 by request)
  • Group fuse per subrack 3 x fused 63A
  • Branch breaker per circuit: C13A for 2.5kVA, C25A for 5kVA, C50A for 10kVA
  • 30mA RCD (residual current protection) per sub-rack by request (RCBO possible)
  • Top and bottom cable-entry feed (bottom standard)
  • Spring-loaded terminals 4mm2 for 2.5kVA, 10mm2 for 5kVA, 16mm2 for 10kVA
 
Request Quote
 

Suggested Products