120V 15A 1-channel Split Duplex Controller

Model: Split Duplex Controller

Use for controlling plug-in electrical loads
Occupancy based automation with auto-ON/OFF or manual ON + auto-OFF using wireless occupancy sensors
Monitors linked battery-free key card, proximity (reed) switches, wall switches, occupancy sensors and photo sensors
Range Confirmation® allows optimal placement of linked sensors - (Echoflex sensors with Range Confirmation® feature only)
Central command support for BEMS gateway control

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The ERNR split duplex receptacle outlet controller provides a simple solution to meet energy codes without requiring complex changes to a facility. The controller offers a split duplex receptacle with a 15A relay-switched outlet and a 15A constant-power outlet. Its auxiliary output allows for additional standard outlets to be controlled by its internal relay. ASHRAE and California energy codes. The split duplex controller mounts in a standard electrical box. Arrow shaped LEDs provide permanent marking of the control outlet and users can choose to have the LEDs turned off.

Use for controlling plug-in electrical loads
Occupancy based automation with auto-ON/OFF or manual ON + auto-OFF using wireless occupancy sensors
Monitors linked battery-free key card, proximity (reed) switches, wall switches, occupancy sensors and photo sensors
Range Confirmation® allows optimal placement of linked sensors - (Echoflex sensors with Range Confirmation® feature only)
Central command support for BEMS gateway control
Supports commissioning via Smart Click®, Simple Tap™ or Garibaldi (remote management) software
Assign up to 20 battery-free wireless wall switches or sensors to one controller
Reliable radio reception range of 24m (80ft) - commercial office spaces (typical), up to 100m (330ft) line of sight
Low-cost alternative to running wires and conduit - ideal for retrofit projects
Doubles as a telegram repeater
Single-channel 15A relay and 15A constant power outlets
120V power input
ETL and cETL Listed
Complies with FCC Part 15.231 and IC RSS-210
Tamper resistant receptacles

Spec Sheet available - Yes

Certifications: ETL, cETL
AC Voltage (Maximum): 120 Volts
Current Draw: 15 Amps
Operating Temperature (Maximum): 113 F
Operating Temperature (Minimum): 14 F
Active Power: 2.50 Watt
Depth: 1.67 in
Height: 2.77 in
Width: 1.61 in
Product Weight: 0.26 lbs

Split Duplex Controller 424950 kb - Data Sheet

Project List

Request Quote

Find a Dealer

Suggested Products

Low-Cost Remote Power Reboot Switch with IEC320 C13 Outlet and 2 Digital Inputs/Outputs

by Network Technologies Inc (NTI)

AC Power Outlet Module for FT2 Series, Single, Australia/New Zealand/China, Type I

by Crestron Electronics, Inc.

AC Power Outlet Module for FT2 Series, Single, Italy, Type L

by Crestron Electronics, Inc.