10 Watt Quad (4-in-1) LED Fixture

Model: eye Ball

7 Quad LEDs or 12 single source 5 watt LEDs
Each Quad LED has a red, green, blue and white component
Quad LED is 12 watt in total but, for long life and reliability, it runs at just 10 watts
Each single source 5 watt LED is in a choice of colors. Warm White, Cool White, RGB, visible UV or invisible UV
White is perfectly balanced so as not to give that blue-white color, so often seen in other fixtures

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

10 Watt Quad LED fixture, at the heart of eye Ball are 7 Quad LEDs or 12 single source 5 watt LEDs. Each Quad LED has a red, green, blue and white component. The Quad LED is 12 watt in total but, for long life and reliability, it runs at just 10W.

7 Quad LEDs or 12 single source 5 watt LEDs
Each Quad LED has a red, green, blue and white component
Quad LED is 12 watt in total but, for long life and reliability, it runs at just 10 watts
Each single source 5 watt LED is in a choice of colors. Warm White, Cool White, RGB, visible UV or invisible UV
White is perfectly balanced so as not to give that blue-white color, so often seen in other fixtures
Uses diffraction lenses which allow the colors to mix perfectly
Despite its size, the output is punchy enough to make a stage light up, even in the most saturated of colors
Available in three beam angles 10, 25 and 40 degrees
Projection on a cyc or wall wash gives an even and wide saturation using the eye Ball
Quad LED has the added advantage of no rainbow color stripes which are always noticeable when an RGB or any individual LED device is used to light a cyc or similar background
Elektralite eye Ball is not just a stage and cyc wash fixture. It can be used as a truss warmer or a shin kicker just as easily and effectively
Single source LED at 5 watts is extremely bright and can be used to highlight products (even with high ambient light present) or light a stage
Controlled via DMX-512 or it can also be set to run automatically, so no need for controller and signal cables
Input voltage range for the eye Ball is between 100 volts to 240 volts
Strong double yoke allows for floor mount or hanging of the eye Ball
Barn doors are available as to be a choice of black or white for the body
Fans can be set to run normally or turned off or they can even be controlled via DMX
Both power input and output for easy “daisy chaining” and comes with a link cable
DMX connectors are 5 pin however 5 to 3 turnarounds are provided to change both input and output to 3 pin

Spec Sheet available - Yes

AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Lamp Type: LED
Lamp Wattage: 10 Watt
Number of Lamps: 7
Beam angles: Available 10º, 25º, 40º

10Watt QUAD LED 990 kb - Data Sheet

Project List

Request Quote

Find a Dealer

Suggested Products

Desktop Studio Light

by Brightline

Lupo DayLED 2000 Fresnel, 280W, 90-240VAC, DMX Dim, Variable White (3200K-5600K), Black, w/ Barn Door, Stand Mount Adapter

by Brightline

BL.16 Studio LED Fixture, Low Voltage, 120v, Super Wide, 3200° K

by Brightline