Video Production Equipment : Video Timecode Equipment, Clocks & Timers : ESE - ES-276U

IRIG-B Time Code Generator/Reader

Model: ES-276U

Generator time settable via panel switch or jam-sync from external code
Continuously regenerates time code when fed from external source
Play speed operation
.56" yellow LED displays
Error bypass ensures smooth readout when reading recorded code

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The ES-276U reads and generates IRIG-B time code at play speed. Nine digits of time are displayed (Day of Year, Hours, Minutes and Seconds) on the front panel display.

Generator time settable via panel switch or jam-sync from external code
Continuously regenerates time code when fed from external source
Play speed operation
.56" yellow LED displays
Error bypass ensures smooth readout when reading recorded code
Wide range (100 mVPP - 10 VPP) AGC input
BNC input connector
19" single-rack height enclosure
Product Options:
1PPS---1 PPS Output: Provides a one pulse per second TTL output synchronized to the time code output.
B---Parallel BCD Output: CMOS compatible, 5-volt logic in parallel four-line format is accessible through a rear-mounted D-sub connector. Clear---Clear Anodized Front Panel
DC---DC Operation: Requires the unit to be powered from a DC source exclusively, typically +12 to +35 VDC.
ESE---ESE Time Code Output: An ESE Time Code output is provided allowing the unit to drive ESE Time Code Slaves.
HR---Relay Contact Closure: A contact closure occurs at the top of each Hour. Hour and 1/2 Hour closure may be ordered on some products. Relay contacts are rated at 10-Watts maximum load, 500mA maximum switching current.
J---220 VAC/50 Hz Operation: The unit is configured to operate from 220 VAC line voltage. 117 VAC 50/60 Hz is standard.
RS---RS-232C Output: Computer Interface allows the time code data to be shared with a computer. RS-422A may be specified.
RS---RS-232C Output: Computer Interface allows the time code data to be shared with a computer. RS-422A may be specified.
TTL---IRIG-B TTL Output: via panel mounted BNC connector
UL---"UL" Approved Power Supply: The unit is supplied with a UL/CSA approved wall mount power supply.

Warranty - Yes

Warranty (Length/Type): 5 Years
AC Voltage: 117 Volts
Active Power: 10 Watt
Depth: 10 in
Height: 1.75 in
Width: 19 in
Certifications: UL

GPS_IRIG_Brochure_2013_pg11.pdf 167 kb - Brochure

Project List

Find a Dealer

Suggested Products

12-in Analog Clock with NTP

by Evertz

16-in Analog Clock with NTP and Back Lighting

by Evertz

NTSC/24Fps Time Code Generator/Reader with VITC

by Evertz