Video Production Equipment : Video Timecode Equipment, Clocks & Timers : ESE - ES-452U

SMPTE / EBU Time Code Reader / Video Inserter

Model: ES-452U

Inserts SMPTE/EBU Time and User Bits into Video (NTSC/PAL)
Reads 1/20 to 10x Play Speed, Bi-Directional
Switchable Background Mask, Keyed or Transparent display
Characters and Background variable from Black to White
Variable Character Size and Position

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

The ES-452U is a Video Character Inserter unit which receives an external source of SMPTE/EBU timecode. 8 digits of Time data (Hours and Minutes and Seconds and Frames) and 8 User Bit digits are superimposed onto a video signal looped-thru the unit. On-screen menus allow adjustment of the display Size and Position and Mask Mode (black background on/off and transparent or solid display). The display mode may be changed to display the Time and User bits either Side-by-Side or Stacked or to display Time or User Bits only. The brightness of the Characters and Background may be individually set via front-panel controls. The display may be turned on/off via a front-panel control. An optional RS-232 interface & Windows(R) Control Panel software may be ordered which allow remote control of the display modes. The unit will read bi-directionally from 1/20 to 10x play speed (dependent upon the audio/timecode performance of the video player).

Inserts SMPTE/EBU Time and User Bits into Video (NTSC/PAL)
Reads 1/20 to 10x Play Speed, Bi-Directional
Switchable Background Mask, Keyed or Transparent display
Characters and Background variable from Black to White
Variable Character Size and Position
Display Blanking function
Battery Back-Up of Settings
Optional RS-232 interface for remote control
One BNC Video input, Two BNC Video outputs
Optional S-Video configuration
Product Options:
Black---Black Anodized Front Panel.
J---220 VAC/50 Hz Operation: The unit is configured to operate from 220 VAC line voltage. 117 VAC 50/60 Hz is standard.
L2---Two Additional Video Input/Output Sets: Available on most Video Inserters.
L4---Four Additional Video Input/Output Sets: Available on most Video Inserters.
P2Dual Rack Mount: Allows specific units to be mounted side-by-side on a single Rack Mount panel.
R---Remote Input: Rear-mounted connector for Remote Control.
SV---The BNC video connectors are replaced with S-VHS connectors.
UL---"UL" Approved Power Supply: The unit is supplied with a UL/CSA approved wall mount power supply.