hamburger-nav-icon
region-flag-icon
Search by Category
Audio
Cameras
Cases & Bags
Computers
Conferencing
Content Management
Control
Displays
Furniture
Lighting & Studio
Mounts & Rigging
Networking & Cabling
Power
Presentation
Production
Residential
Security & Safety
Signal Management
Search by Manufacturer
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
#
Search by Category
EnglishFrenchGermanItalianPortugueseSpanish
ESE - ES-993U
ese
Request
Quote
Find
A Dealer

2.3"(Hr & Min) / 1" (Sec) Wall Mount Remote Display

Model: ES-993U

  • Wall Mount Display
  • Reads SMPTE/EBU, ASCII & ESE Time Code™
  • Automatic Code Detection
  • Six Amber LED Displays (2.3" high Hours & Minutes, 1" high Seconds)
  • Viewing Distance 70'
Compare
Project List
Product Info
Tech Specs
Related Products
Documents
The ES-993U is a Time Code display featuring 2.3 in. high (Hours & Minutes) and 1 in. high (Seconds) yellow LED displays. The unit is housed in a black-textured aluminum wall-mount enclosure (5 in. H x 12 in. W x 3.5 in. D). The unit accepts via the rear-mounted terminal block either ESE Time Code (TM) (TC76 or TC89 or TC90) or SMPTE/EBU Time Code. RS-232C ASCII Time Code (format 0 or 1 or A at 9600 baud) may be input via the rear-mounted 9-pin connector. The ES-993U will automatically determine which code is being received. A rear-mounted DIP switch is used to configure the display for 12 or 24 Hour format or to display the Date instead of time-of-day (if incoming time code contains Date information such as ESE TC90 or date-encoded SMPTE/EBU or ASCII formats 1 or A). If the Time Zone option is ordered -- a rear-accessible DIP switch is installed for this function. If receiving ESE Time Code (TM) from a timer -- the unit will display Minutes and Seconds and Tenths of Seconds (if the timer has the Tenths option).
  • Wall Mount Display
  • Reads SMPTE/EBU, ASCII & ESE Time Code™
  • Automatic Code Detection
  • Six Amber LED Displays (2.3" high Hours & Minutes, 1" high Seconds)
  • Viewing Distance 70'
  • Switchable Between 12 & 24 Hour Format Display
  • Switchable to Date display
  • Optional Time Zone Offset
  • NTP Option Available
  • UL & 220-240 VAC options available (110-120 VAC is standard)
  • Product Options:
  • Black---Black Anodized Front Panel.
  • Blue---Blue LED Displays
  • Green---Green LED Displays
  • J---220 VAC/50 Hz Operation: The unit is configured to operate from 220 VAC line voltage. 117 VAC 50/60 Hz is standard.
  • NTP---Client, NTP Clients synchronize with an NTP server.
  • P---19" Front Panel (Rack Mount): Designed for mounting into a standard equipment rack. Panel is 1/8" clear or black anodized Aluminum and chassis is 5" - 10" deep.
  • Red---Red LED Displays
  • TZ---Time Zone Offset: Internal DIP switch allows the hours (and half-hour) to be independently offset to any time zone.
  • UL---"UL" Approved Power Supply: The unit is supplied with a UL/CSA approved wall mount power supply.
  • W---3-Wire Power Cord: Recommended where static charges can occur. Standard on many units, otherwise a 2-wire cord is supplied.
 
Request Quote