The VIP-X simultaneously addresses two common challenges by combining a functional and highly reliable control room routing platform with a modular multi-image display system in one integrated package. Building your next control room will be simple using the VIP-X, as it enables two complex items in the control room to function as a single system.
High Quality Image Reproduction
Complete Facility Solution
Any Input, Any Output, Any Display, Any Size
The Largest System in the Industry
Monitoring: On-screen and Using SNMP
Industry Standard User-Interface
3Gb/s Support
Aspect Ratio
Display Applications
Supported Resolution - Other
High Definition - Yes
Spec Sheet available - Yes
High Definition:
Yes
Active Power:
75 Watt
DC Voltage:
12 Volts
Standard:
3Gb/s (SMPTE ST 424), and/or HD-SDI (SMPTE ST 292-1), SD-SDI (SMPTEST 259-C)
Number of Inputs:
Router platform dependent
Connector:
BNC IEC 61169-8 Annex A
Input Impedance:
75 ohm
Equalization:
Automatic to 100m (Belden 1694A)
Return Loss:
15dB typical (5-1485MHz)
Embedded Audio:
SMPTE ST 272-A, SMPTE ST 299-1
Input Resolution:
640x480 (VGA) to 1600x1200 (UXGA)
Number of Outputs:
Router platform dependent
Signal Level:
800mV nominal
DC Offset:
0V ±0.5V
Rise and Fall Time:
200ps nominal (HD)740ps nominal (SD)
Overshoot:
< 10% of amplitude
Video:
1V p-p RGB, 60/50Hz refresh
Impedance:
50 ohm
Type:
NTSC/PAL color black
Level:
1V p-p nominal
GPI:
1 Opto-isolated, active low with internal pull-ups to +5V
GPO:
1 Relay closure to ground
Input Signal:
Closure to ground
Number of Ports:
1 RS-232 (pins 6,7) or 1 RS-422 (pins 1,2,6,7)
Baud Rate:
Up to 1Mbaud
Format:
Image Video, TSL
Network Type:
Fast Ethernet 100 Base-TX 1EEE 802.3U standard for 100Mb/s base band CSMA/CD local area network