The MITUS 210MA bi-amplified speaker feature 0.59" birch plywood construction, the front shall be protected by a heavy duty metal grille with anti-resonance spacers and exclusive synthetic cloth to protect the drivers and a rugged touring grade scratch resistant black paint finish protects the cabinet exterior. The MITUS 210MAis a two way coaxial design incorporating a 10" B&C custom neodymium magnet coaxial speaker with 2.5" voice coil and 1.4" exit titanium compression driver with 2.5" voice coil, a 10" neodymium magnet woofer with 2.5" voice coil, a class D built-in amplifiers 600W RMS to the LF and 300W RMS to the HF with switch mode power supply. The MITUS 210MA provides a DSP with A/D-D/A low noise converters with 8 selectable presets. The MITUS 210MA shall meet the following performance criteria is frequency response of 60Hz to 20kHz, maximum SPL of 132dB, nominal impedance 8 Ohms LF / 8 Ohms HF. The control panel provides XLR in/link, volume, preset, HP filter, GND lift switch. A standard 1.38" speaker stand socket allows the MITUS 210MAto be mounted on speaker stand.