The FL-640P floor box is designed for raised access carpeted floors. This floor box provides a practical solution for cable storage while maintaining easy access. The lift off section of the cover allows full access to the internal cables and connector plates. A smaller hinged trap door folds back to create the cable exit. Cables can be stored within the floor box when not in use, allowing unencumbered travel over the floor. The sturdy drop-in floor lip supports the unit and installs flush with the floor. The 1/4" carpet edging is available in brass or aluminum. The sturdy 11 gauge cover is installed flush with the floor. The low profile edging is 1/4" high and is available in brass or aluminum. When the floor box is not in use, only the elegant, hand mitered carpet edge is visible. Inside the FL-640P, two angled brackets are provided for cable connections with ample clearance for cable connectors. The angled brackets provide, two single, one triple, and a six gang opening, which are all isolated for maximum safety. The FL-640P is extremely sturdy (steel and welded construction) and has been designed to fit the needs of power, audio, video, telecommunications, and data applications. Each floorbox comes with a temporary cover. Note: This floor box is only intended for carpeted floors, where the accumulation of scrub water is unlikely to occur. Additionally this box is not applicable for contact with grade.