hamburger-nav-icon
region-flag-icon
Search by Category
Audio
Cameras
Cases & Bags
Computers
Conferencing
Content Management
Control
Displays
Furniture
Lighting & Studio
Mounts & Rigging
Networking & Cabling
Power
Presentation
Production
Residential
Security & Safety
Signal Management
Search by Manufacturer
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
#
Search by Category
EnglishFrenchGermanItalianPortugueseSpanish
Find
A Dealer

4K Ultra HD HDBaseT Extender

Model: GTB-UHD-HBT

  • Extends HDMI, RS-232, and Bi-Directional IR over a single CAT-5e/CAT-6A:
  • 4K Ultra HD (3840x2160 at 60 Hz, 4:2:0), up to 330 feet/100 meters (8-bit color)
  • 4K Ultra HD (3840x2160 at 30 Hz, 4:4:4), up to 330 feet/100 meters (8-bit color)
  • 4K Cinema (DCI) (4096x2160 at 24 or 30 Hz 4:4:4), up to 330 feet/100 meters (8-bit color)
  • 1080p Full HD (60 Hz), up to 330 feet/100 meters (up to 12-bit Deep Color)
Compare
Project List
Product Info
Tech Specs
Related Products
Documents

4K Ultra HD HDBaseT™ Extender over one CAT-5 with RS-232, 2-way IR, and Bi-Directional POL

The GTB-UHD-HBT 4K Ultra HD Extender uses Gefens implementation of the latest HDBaseT technology to extend HDMI up to 495 feet/150 meters at 1080p (8 bits) and up to 330 feet/100 meters at 4K. Small, low profile enclosures can be securely surface-mounted and conveniently hidden away from sight.

Video Support

Resolutions up to 4K Ultra HD (3860 x 2160 at 60 Hz, 4:2:0) are supported. This product is compliant with the latest HDCP 2.2 protocol as well as HDCP 1.4.

Audio Support

The GTB-UHD-HBT supports Stereo and Multichannel digital audio including 7.1 channels of LPCM as well as High Bit Rate (HBR) digital audio formats such as Dolby® TrueHD and DTS-HD Master Audio. TOSLINK® Optical Digital Audio can be sent from the display side back to the source and analog audio can be extended from the source side to the Receiver.

IP and Serial Extension

This product provides RS-232 and 2-way IR extension between the Sender and the Receiver units, facilitating the control of A/V sources placed near the Sender unit and sending automation commands to the display or another device placed near the Receiver unit.

Bi-Directional Power Over HDBaseT

Gefen Bi-Directional POL (Power Over Line) technology powers the Sender or the Receiver unit using the same cable that extends the HDMI signal. Only one of the two units will need a power supply. This feature simplifies installation in cases when an electrical outlet may not be available near the source or the display.

  • Extends HDMI, RS-232, and Bi-Directional IR over a single CAT-5e/CAT-6A:
  • 4K Ultra HD (3840x2160 at 60 Hz, 4:2:0), up to 330 feet/100 meters (8-bit color)
  • 4K Ultra HD (3840x2160 at 30 Hz, 4:4:4), up to 330 feet/100 meters (8-bit color)
  • 4K Cinema (DCI) (4096x2160 at 24 or 30 Hz 4:4:4), up to 330 feet/100 meters (8-bit color)
  • 1080p Full HD (60 Hz), up to 330 feet/100 meters (up to 12-bit Deep Color)
  • 1080p Full HD (60 Hz), up to 495 feet/150 meters (8-bit color)
  • HDMI Features Supported:
  • HDMI 2.0
  • HDCP 2.2 and 1.4
  • 12-bit Deep Color
  • LPCM 7.1, Dolby Atmos®, Dolby® TrueHD, DTS:X™, and DTS-HD Master
  • Audio™ pass-through
  • 3DTV pass-through
  • CEC pass-through
  • Lip Sync pass-through
  • IR extension from Sender to Receiver and from Receiver to Sender
  • Gefen Bi-Directional POL feature provides power to the Sender or the Receiver unit
  • over the link cable - only one side will need external power
  • Uses Gefen’s implementation of HDBaseT™ technology with enhanced features
  • Advanced EDID Management
  • Firmware updatable via RS-232
  • Locking power connector
  • Surface mountable
 
 

Suggested Products