hamburger-nav-icon
region-flag-icon
Search by Category
Audio
Cameras
Cases & Bags
Computers & Software
Conferencing
Content Management
Control
Displays
Furniture
Lighting & Studio
Mounts & Rigging
Networking & Cabling
Power
Presentation
Production
Security & Safety
Signal Management
Search by Category
EnglishFrenchGermanItalianPortugueseSpanish
Gilderfluke & Company, Inc. - BR-SDC/422

RS-232/-422 Small Stand-alone Controller

Model: BR-SDC/422

  • Fifteen different serial strings of up to 127 characters each
  • Plug it into the serial port on a PC to configure
  • Write protect switch protects against accidental configuration changes
  • Ten optoisolated inputs to synchronize Br-SDC/422s with pushbuttons, realtime events and other control systems. Two of the inputs use screw terminals. The other eight use a standard 1/4 J6 connector.
  • These can be used in ‘binary’ mode to connect a binary coded keypad
Compare
Project List
Product Info
Tech Specs
Related Products
Documents
The Br-SDC/422 is a small, stand-alone RS-232 controller. It is used whenever you need to control any device that needs strings of RS-232 serial data. It can be used to with almost any serial controlled device. The Br-SDC/422s can be controlled from Gilderfluke & Co.'s Show Control Systems, PLCs or any other control systems. Just attach some buttons, and you can make your own interactive video kiosk.

The Br-SDC/422 can be set to send out strings on power up or in response to any of its ten optoisolated inputs. Different actions can be taken on the opening or closing edges of any inputs. The Br-SDC/422 can then branch to a different serial string or completely different ‘show’ if the response to the string is correct or in error.

  • Fifteen different serial strings of up to 127 characters each
  • Plug it into the serial port on a PC to configure
  • Write protect switch protects against accidental configuration changes
  • Ten optoisolated inputs to synchronize Br-SDC/422s with pushbuttons, realtime events and other control systems. Two of the inputs use screw terminals. The other eight use a standard 1/4 J6 connector.
  • These can be used in ‘binary’ mode to connect a binary coded keypad
  • Different actions can take place on opening and closing edges of inputs
  • Strings can include ‘delays’ of one frame to over nine hours
  • The Br-SDC/422 can send a different string, or play a different show if any string gets an incorrect serial response from the device it is controlling
  • Built in commands for Pioneer LaserDisc & DVD players, or Sony LaserDiscs
  • Supports both CAV (thirty minute) and CLV (one hour) LaserDiscs
  • The Br-SDC/422 comes with RJ-12 TS-422 output
  • The Br-SDC/422 runs on anything from nine to twenty-four VDC. It includes a small nine VDC ‘wallwart’ power supply. 110VAC standard, 220VAC on request.
  • Br-SDC/422s are often mounted by their connectors or by the Velcro on their backs. Typically they are mounted right on whatever they are controlling.
  • Includes:
    • PS-9vdc-200ma: 9vdc x 200ma Wall Wart (w/plug) CUI
    • C-RJ12x3: 3 foot long RJ12 cable
    • RJ11 ‘Flip’ Cable: RJ11 cable that flips the +Rx & -Rx signals with the +Tx & -Tx signals
    • GilderCD: CD-ROM with all of our Software & Manuals
 
 

Suggested Products