hamburger-nav-icon
region-flag-icon
Search by Category
Audio
Cameras
Cases & Bags
Computers
Conferencing
Content Management
Control
Displays
Furniture
Lighting & Studio
Mounts & Rigging
Networking & Cabling
Power
Presentation
Production
Residential
Security & Safety
Signal Management
Search by Manufacturer
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
#
Search by Category
EnglishFrenchGermanItalianPortugueseSpanish
Gilderfluke & Company, Inc. - Kp-300
Find
A Dealer

Control Panel for Motion Bases and other Smart Brick Installations

Model: Kp-300

  • Because many features of the Kp-300 are safety related, it has no microcontroller of any kind. With no microcontroller, there is no possibility of a software crash locking up it up.
  • Membrane-style keypad to select and play up to eight different shows, start and stop the Hydraulic Power Unit (if there is one), log unoccupied seats, and pause or ‘unpause’ shows
  • Mushroom E-Stop button can be used to stop any show at any time. Turn-to-release latch is used to clear the E-Stop button. Shows must be restarted from the beginning after any E-Stop
  • Fifteen optoisolated fail safe inputs. Each can be configured to E-Stop the system, pause a currently running show, or force the HPU off as long as the error condition persists
  • If an input is used to monitor a seat belt, it can be logged to ignore an unoccupied seat. This can be done automatically, from the Kp-300 or remotely.
Compare
Project List
Product Info
Tech Specs
Related Products
Documents
The Kp-300 is an operator panel which can be used in a Motion Base or any other Smart Brick application. With the addition of a three slot card cage on its back, the Kp-300 can become a complete motion base control system in just 5-1/4" (3U) of 19" rack space. A Smart Brick System can sync to Smpte time code or run as many as seven LaserDiscs/DVDs.
  • Because many features of the Kp-300 are safety related, it has no microcontroller of any kind. With no microcontroller, there is no possibility of a software crash locking up it up.
  • Membrane-style keypad to select and play up to eight different shows, start and stop the Hydraulic Power Unit (if there is one), log unoccupied seats, and pause or ‘unpause’ shows
  • Mushroom E-Stop button can be used to stop any show at any time. Turn-to-release latch is used to clear the E-Stop button. Shows must be restarted from the beginning after any E-Stop
  • Fifteen optoisolated fail safe inputs. Each can be configured to E-Stop the system, pause a currently running show, or force the HPU off as long as the error condition persists
  • If an input is used to monitor a seat belt, it can be logged to ignore an unoccupied seat. This can be done automatically, from the Kp-300 or remotely.
  • More safety inputs and outputs can be added if needed by plugging one or more Kp-300 Expansion to the Kp-300
  • Each expansion adds 42 inputs, and 14 factory configured outputs
  • LEDs show the condition of each of the inputs or if they are set to be ignored by the seat belt logging feature
  • If an input triggers an error condition (E-Stop or show pause), a flashing red LED indicates the offending input
  • This allows you to catch the source of short lived error conditions
  • The Solid state counter records the number of show cycles run. Count is retained even with power off.
  • Two input bypass busses can be used to temporarily disable error inputs from software. An example of this feature's use would be on inputs used for door sensors
  • While these should trigger errors while the motion base is running, they must be disabled during the load/unload times
  • Blocking valve output is forced off automatically during any E-Stop or if the HPU isn't running
  • Shows can be paused either manually or by an error condition on a safety input. When a show is paused, the motion base will freeze
  • The operator can then continue the show once the error condition has cleared, call up a show to park the motion base, or do an E-Stop to bring it home
  • When used with a three slot card cage and Smart Brick System mounted on its back, the small LCD display on the Smart Brick Brain is replaced by a large display on the front of the Kp-300
  • The Keyswitch can be used to ‘lock’ the Kp-300 to keep unauthorized shows from being run
  • The Kp-300 uses twenty-four digital outputs and twenty-four vdc power from the Smart Brick System
  • Package Contents:
    • 1 - Kp-300
    • 1 - Gilder CD w/Software & Manuals
 
 

Suggested Products