Control Systems : Related Control Systems Products : Gilderfluke & Company, Inc. - PB-DMX

PB-DMX Relays and Controller

Model: PB-DMX

Part #: PB-DMX/0

Plugs onto a Grayhill 8, 16, 24, or 32 position ‘G5’ relay mounting boards
Accepts standard DMX-512 data. Address is set through serial port
Programming and operation are identical to a Br-miniBrick8, but with 32 outputs
Automatic ‘program in place’ download through the RS-232 serial port on your PC and the included PC•MACs software. It takes about thirty seconds to download a ten minute show
‘Test’ button allows outputs to be manually turned on one at a time

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

The PB-DMX is a show controller for 8, 16, 24 or 32 3.5 amp AC/DC relay outputs. The newly expanded 4 MByte flash memory holds approximately 9 hours of shows. DMX-512 in/out and optoisolated trigger inputs are standard. The DMX-512 can easily be used to network together PB-DMXs for thousands of outputs.

Plugs onto a Grayhill 8, 16, 24, or 32 position ‘G5’ relay mounting boards
Accepts standard DMX-512 data. Address is set through serial port
Programming and operation are identical to a Br-miniBrick8, but with 32 outputs
Automatic ‘program in place’ download through the RS-232 serial port on your PC and the included PC•MACs software. It takes about thirty seconds to download a ten minute show
‘Test’ button allows outputs to be manually turned on one at a time
Two optoisolated inputs are used to trigger from push buttons, motion sensors, or any other type of switch
AC and DC relay output modules are available. Typical current capacity is 3.5 amps each. You can freely mix both AC and DC relay output modules on any PB-nn mounting board

Systems Controlled - Lighting

Color: Red, Green
Certifications: CE, FCC

232conv-09 - RS-232 to RS-422 9-pin Female Serial Port Adapter

C-XLR5F - 5-position XLR Female Connector

C-XLR5M - 5-position XLR Male Connector

DMX-OPTO - Rack Mount DMX Optoisolator

DMX-OPTO 123 - One In to Three Out Rack Mount DMX Isolator/Splitter

DMX-OPTO 125 - One In to Five Out Rack Mount DMX Isolator/Splitter

DP-DMX20L - Four Channel DMX-512 Input Dimmer Pack

DP-DMX640 - Six Channel Hybrid DMX Pack

Ir-Passive - Passive Infrared Motion Detector

Ir-Retro - Infrared Beam-break Detector

Ir-Thru - Infrared Beam-break Detector

MACs-Cust - Custom Programming Console for PC MACs Show Control Systems

MACs-License - Windows-Based Show Control System

Mp3-50/CBL - RS-232 Serial 1/8" Stereo Jack to DE-09 Cable

PB-DMX/08 - 8-output Relay Controller

PB-DMX/16 - 16-output Relay Controller

PB-DMX/24 - 24-output Relay Controller

PB-DMX/32 - 32-output Relay Controller

PS-24vdc/2.5A - 60W 2.5A Switching Power Supply

Find a Dealer

Suggested Products

Micro Environment Monitoring System, Integrated Temp/Humidity Sensor, POE. Power supply NOT included. TAA compliant.

by Network Technologies Inc (NTI)

Micro Environment Monitoring System /Remote Temperature/Humidity Sensor over IP

by Network Technologies Inc (NTI)

Low-Cost Air Velocity Sensor

by Network Technologies Inc (NTI)