The OP+SFS+Ax+ 3G/HD/SD video frame synchronizer is an auto-timing serial digital frame synchronizer and audio synchronizer processing module for the 6800+™ frame.
With both video and full audio processing capabilities, the OP+SFS+Ax+ allows for control over the picture, embedded audio processing and audio tracking. Full handling of the embedded metadata is provided, along with the ability to de-embed and re-embed metadata from external sources. The module includes:
- One video serial digital input
- Four synchronized video serial digital outputs
- Genlock reference video input (card or frame)
- A special output (data I/O) for the hot switch and I/O delay signals for tracking audio processing
- A RS-232/422 serial connector for metadata embedding and de-embedding
The module has an option for eight AES input and eight AES output ports, allowing for separate audio processing of 16 channels. This provides the ability to select these 16 channels along with 16 embedded channels from the SDI input.
In addition, eight discrete Analog audio inputs or outputs functionality was added.
The OP+SFS+Ax+ can be controlled manually via card-edge controls with OSD video display or remotely using CCS Navigator™, HTTP web server or third-party SNMP-based control applications. In addition, the module is Q-SEE-compliant, allowing for direct thumbnail monitoring when installed in a FR6822+QXFE frame.
- Video frame and audio sync with genlock support
- Full 3 Gb/s support
- Audio embedder and de-embedder
- Seamless sound functionality: audio embedding on loss of video
- Fast Switch feature allows for clean/quiet output on hot switch at the input with no output frame freeze
- Dolby® header adjustment
- Fiber TX or RX
- Eight AES inputs and outputs
- Eight balanced discrete Analog Audio inputs OR outputs (different ordering P/N)
- 10-bit video processing
- Passes all HANC samples
- Passes VANC with user-selectable option for VBI/ANC line-by-line video deleting
- Up to eight frames of HD and 50 frames of SD video delay
- Ability to embed AES on output (fiber or SDI) without video source or genlock
- Ability to de-embed metadata and embed external metadata
- Operates video standards:
- 525 and 625 (SMPTE 259M)
- 1080i/p
- 720p (SMPTE 274M/296M)
- 3 Gb/s (SMPTE 424M) upgradeable
Loss of video modes:
Pass
Black
Freeze
Video processing amplifier with controls for:
Luminance gain
Luminance offset
Chrominance gain
Chrominance offset
White clip
Black clip
Hue adjustment
Audio processing amplifier for de-embedded and external audio channels:
Gain
Swap
Invert
Delay
Mix (sum)
Video and audio test generator
16, 20- or 24-bit audio processing
DATA I/O signal provides audio tracking and hot-switching information to other modules
C, U and V bit transparency
VBI line-by-line deleting
Auto-detect or user-forced input video standard
Inputs:
One video serial digital input
Genlock input (composite or tri-level sync) frame or card user selectable
Eight AES inputs (unbalanced, balanced compatible with external baluns)
Eight Analog audio inputs
DARS input (unbalanced, balanced compatible with external baluns)
RS-232/422 serial port for external metadata source
Optional fiber receiver
Outputs:
Four synchronized serial video digital outputs
One DATA I/O signal for tracking audio processing
Eight AES outputs (unbalanced, balanced compatible with external baluns)
Eight Analog audio outputs
RS-232/422 serial port metadata output
Optional fiber transmitter
Shadowed/restored parameter settings when switching video standards
Card-edge control
Ethernet remote control and monitoring
Q-SEE™ thumbnail support
Supports:
Video frame and audio sync with genlock support
Audio embedder and de-embedder
Audio embedding on loss of video
Data embedder and de-embedder
Dolby® header adjustment
Fiber TX and/or RX
Advanced audio procamp with audio routing
Audio limiter
VBI line-by-line deleting
Video procamp
Eight AES in/out support
Eight Analog Audio in/out support
AFD metadata handling
