The new Selenio™ JPEG2000 module is a multichannel decoder solution, offering real-time, high-quality JPEG2000 compression over IP.A single module supports up to four HD/SD-SDI channels or two 3G-SDI channels.
Delivering superior interoperability with many third-party JPEG2000 solution vendors, this module harnesses the power of the Selenio media convergence platform, which offers higher density, enhanced redundancy schemes, an easy-to-use interface and low total cost of ownership. The platform’s flexible, expandable design enables customers to mix and match JPEG2000 and H.264/MPEG-2 functionality, as well as other Selenio processing capabilities, in the same frame, for a future-proof solution.
- Multichannel, real-time JPEG2000 compression in a single-slot Selenio module
- Support for 10 bits/4:2:2, standard latency, up to 4 HD/SD channels or 2 3G channels, visually lossless encoding and decoding (including genlock)
- 8 HD-BNC ports, plus internal SDI links to/from other Selenio products
- Dual-network interfaces supporting 1GigE SFP (electrical/fiber)
- Software key-upgradeable between the different encoder/decoder channel options
- Multichannel 3G/HD/SD-SDI video encapsulation using SMPTE 2022-2
- Standards-based FEC, supporting SMPTE 2022-1 for protection against packet losses created by occasional network errors
- Low latency (<40 ms end-to-end) and ultra-low latency (sub-frame latency) contribution, JPEG2000 compression and encapsulation
- Support for Near/Mathematically Lossless (MLS) compression for video signals
- Configurable transport stream bit rates with automatic video rate optimization based on audio and ancillary data to be carried
- Support for DVB-ASI network interface for use in traditional video networks employing ASI multiplexing
- Support for Unicast and Multicast transmission
- Support for SMPTE 2022-7 seamless protection specification
- Support for VLAN tagging for segregation of traffic and Quality of Service differentiation via TOS
- Audio transport for up to 8 pairs (4 groups) of AES audio for
- HD/SD signals including Dolby® E and AC-3
- Dolby® E-compatible frame skip and repeat on non-PCM signals
- Transparent transport of VANC data for HD/SD signals
- Supported by Service Manager, Reservation-Based Scheduling and Management application
- Support for Selenio standard software upgrade method
- Support for Selenio audio expander module for additional AES I/O
- Support for full redundancy schemes provided in Selenio platform, N+M, N+1, 1+1 and more
- Markets/Applications
- Professional broadcast contribution (contribution from event venue to studio/network)
- Studio-to-studio media exchange (production contribution)
- In-house signal distribution and routing (dynamic IP-based tie-lines)
- Live event coverage/fiber-based news and remote studio productions
- Real-time transport of 3G/HD/SD over IP
