Dual 2-way Microphone Splitter Module with Phantom

Model: DIN-2MS-2P

Provides additional, isolated balanced output as mic splitter
Solves transformerless preamp RFI and CMRR problems
High common-mode rejection of 130dB at 60Hz
Excellent frequency response and time domain performance
Provides support circuitry for phantom powered microphones

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

Dual 2-way microphone splitter module with phantom. This module is designed to be driven from a 150 ohm microphone source and loaded by the typical 1kohm input impedance of microphone preamplifiers. It can be used with balanced or unbalanced sources and/or loads since both primary and secondary are fully balanced. A 30dB magnetic shield package is standard.

Provides additional, isolated balanced output as mic splitter
Solves transformerless preamp RFI and CMRR problems
High common-mode rejection of 130dB at 60Hz
Excellent frequency response and time domain performance
Provides support circuitry for phantom powered microphones

Spec Sheet available - Yes

Input Impedance: 1.08 kohm (1kHz, -20dBu, test circuit 1)
Voltage Gain: -0.82 dB (1kHz, -20dBu, test circuit 1)
Magnitude response, ref 1kHz: -0.09 (20Hz, -20dBu, test circuit 1) and -0.10 (20kHz, -20dBu, test circuit 1) dB
Deviation from linear phase (DLP): +1.7/-0 degree (20Hz to 20kHz, -20dBu, test circuit 1)
Distortion (THD): <0.001 (1kHz, -20dBu, test circuit 1) and 0.036 (20Hz, -20dBu, test circuit 1) %
Maximum 20Hz output level: +2.0 dBu (1% THD, test circuit 1)
Common-mode rejection (CMRR) ratio: 130 (60Hz, test circuit 2) and 95 (3kHz, test circuit 2) dB
Output Impedance: 250 ohm 1kHz, test circuit 1
DC Resistance: 50 primary (pin 4 to pin 5, or pin 13 to 14) and 50 secondary (pin 7 to pin 8, or pin 16 to 17) ohm
Capacitance: 75 (primary to shield and case) and 87 (secondary to shield and case) pF
Turns Ratio: 1:1.000 (primary to any secondary )
Breakdown Voltage: 250 Vrms (primary or secondary to shield and case, 60 Hz, 1 minute test duration
Operating Temperature (Maximum): 158 F
Operating Temperature (Minimum): 32 F

Splitter Module 211 kb - Data Sheet

Project List

Request Quote

Find a Dealer

Suggested Products

Splitter, HDMI 2.0a, 1X4, 18Gbps

by Covid, Inc.

High Bandwidth Ethernet Switching Fabric for Video Application

by Evertz

Video Controlled Relay - BNC

by RDL, Radio Design Labs