4-way Microphone Splitter Module with Phantom

Model: DIN-MS-4P

Provides 3 additional, isolated balanced outputs as mic splitter
Stops ground loop problems when a mic feeds multiple preamps
High common-mode rejection of 120dB at 60Hz
Excellent frequency response and time domain performance
Low insertion loss of 2.2dB typical

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

4-way microphone splitter module with phantom. This unit is designed to provide 3 additional, isolated microphone level outputs when driven from a 150 ohms microphone source. The use of individual Faraday shields on each winding produces excellent RF attenuation and high common mode rejection. A 30dB magnetic shield package is standard.

Provides 3 additional, isolated balanced outputs as mic splitter
Stops ground loop problems when a mic feeds multiple preamps
High common-mode rejection of 120dB at 60Hz
Excellent frequency response and time domain performance
Low insertion loss of 2.2dB typical

Spec Sheet available - Yes

Input Impedance: 1 kohm (1kHz, -20dBu, test circuit 1)
Voltage Gain: -2.2 dB (1kHz, -20dBu, test circuit 1)
Magnitude response, ref 1kHz: -0.05 (20Hz, -20dBu, test circuit 1) and -0.27 (20kHz, -20dBu, test circuit 1) dB
Deviation from linear phase (DLP): +0.9/-0 degree (20Hz to 20kHz, -20dBu, test circuit 1)
Distortion (THD): <0.001 (1 kHz, -20dBu, test circuit 1) and 0.022 (20Hz, -20dBu, test circuit 1) %
Maximum 20Hz output level: +11 dBu (1% THD, test circuit 1)
Common-mode rejection (CMRR) ratio: 120 (60Hz, test circuit 2) and 85 (3kHz, test circuit 2) dB
Output Impedance: 285 ohm 1kHz, test circuit 1
DC Resistance: 72 primary (4, 5) and 71/80/62 secondaries 1 (7,8) 2(10,11) 3(13,14) ohm
Capacitance: 275 (primary (7,8) to shield) and 410/420/347 (secondaries 1 (7,8) 2(10,11) 3(13,14) to shield) pF
Turns Ratio: 1:1.000 (primary to any secondary)
Breakdown Voltage: 250 Vrms (primary or secondary to shield and case, 60 Hz, 1 minute test duration
Operating Temperature (Maximum): 158 F
Operating Temperature (Minimum): 32 F

Splitter Module 221 kb - Data Sheet

Project List

Request Quote

Find a Dealer

Suggested Products

Splitter, HDMI 2.0a, 1X4, 18Gbps

by Covid, Inc.

32-port Integrated Switching Fabric with 600Gbps Bandwidth

by Evertz

12 x 2 3G/HD/SD SDI Video Bypass Protected Router

by Evertz