The KanexPro SW-4X1SL18G is an UltraSlim auto-switcher with 4-input and 1-output which auto-identifies input resolutions of up to four HDMI devices to one 4K display supporting full 4:4:4 YUV color space and 18Gbps of bandwidth. This switcher can be controlled from the front panel, IR Remote, or by sending RS-232 commands, the corresponding indicator will illuminate to show real-time switching status. It can transmit uncompressed 4Kx2K at 60Hz 4:4:4 (at max) signal and supports HDMI 2.0 and HDCP2.2 compliant.
- UltraSlim 4x1 HDMI switcher with ARC
- Auto-switching enabled
- Supports 4K x 2K at 60Hz
- Supports YUV 4:4:4 color space
- Incredibly thin design - only 0.4-inch (11mm) thick
- High-bandwidth 18Gbps
- HDCP 2.2 compliant
- Transmits 4K over HDMI cable up to 10m (32ft)
- HDMI supports ARC (audio return channel)
- Auto-identifies input resolutions to match displays via hot-plug
- Supports CEC to control source or display device via IR remote and RS232 commands
- Supports EDID management
- Micro USB port for firmware update
- Control via RS-232, IR and front panel buttons
- Remote control included
