4K UHD AV over IP encoder with independent video, audio, KVM/USB routing. Audio De-embed with volume, delay, and bass/mid/treble control, 2 port PoE lan switch, HDMI pass-through, 3 port IR, RS-232, trigger master controller / control gateway.
- Enterprise AV Over IP: Utilizes a managed gigabit network switch to enable video distribution, matrix switching, and extension
- Video Wall Processing: Encoder + Decoder systems create video walls with up to 16 vertical and 16 horizontal monitors
- Independent Switching: Video, audio, and USB switching all independently routable routed for multi-layer systems
- Control: 3 multi-function ports may be used as third-party control interface, Compass Control® Pro master controller, control extension via IP, or callable via KeyCode open API
- Key Digital® App Ready: Network scan and detect populates pre-built GUI including image preview, and finger drag video wall layout control
- HDCP 2.2: Compliancy up to HDCP 2.2 and backward compliant
- 4K/Ultra HD Resolution: Support for 4096x2160 or 3840x2160 24/25/30Hz at 4:4:4/8 Bit or 60Hz at 4:2:0/8 Bit (10.2Gbps max bandwidth)
- 4K Down-scale: Incoming 4K resolution can be down-converted to 1080p or 720p at each decoder, enabling monitors to display content at optimal resolution at all times
- Audio De-Embedding: At Encoder and Decoder for ease of integration with audio systems
- Audio Pre-Amp: Variable level settings for volume, muting, EQ, balance, and lip-sync delay per Encoder and Decoder
- HDMI Pass-Through (ENC): Enables connection to local monitor or other AV Devices
- Local HDMI Input (DEC): Creates localized input option ideal for presentation spaces
- Signal Extension: Up to 330ft. / 100 m at 4K 24/25/30(4:4:4)/60(4:2:0) into network switch or point-to-point
- Power over Ethernet: Does not require power supply when integrated with compatible PoE network switch
- Redundant Power Connection: Added reliability for non-PoE integration.
- Data Stream Bandwidth:
- Latency:
- Installation: Use KD-SMS16 to cleanly install up to twelve KD-IP822/ENC/DEC units in rack
- Dual LAN: Built-in switch enables network connectivity and PoE powering of connected devices.
- USB 2.0: Supports synchronous and isochronous connections (web cams not supported)
- HDMI® and HDCP Licensing: Fully licensed and compatible with HDCP 2.2 and HDMI latest technology such as 4K/UHD 4:2:0/8bit at 60 f/s
- EDID Control: Internal library features 15 default EDID configurations and native EDID data from Output/Display devices connected to Decoder
- Hot Plug Detection Control: Enables integrator to choose if active signal voltage is forced to connected input devices
- Full Buffer System™: Manages TMDS re-clocking / signal re-generation, HDCP authentication with source and display, EDID Control handshake, and Hot Plug control
- IR Sensor: Sensor powering via +5V IR In port collects line-of-sight IR from remote(s) without external IR connecting block
- Up/Down IR: Two channels of IR enable control to/from devices connected to Encoder and Decoder units
- RS-232: Bi-Directional control to/from Encoder and Decoder unit on Phoenix connector
- RS-232/TCP-IP Control Mode: Provides control of unit as well as connectivity status
- Lossless compressed digital audio: Support for Dolby® TrueHD, Dolby® Digital Plus, Dolby Atmos®, and DTS-HD Master Audio™
- Control System Support: Controllable by all IR, RS-232 and TCP/IP supported control systems via open API: Compass Control® Pro, AMX®, Control4®, Crestron®, KNX®, RTI®, Savant, URC®, Leviton® etc
