Fiber Optic Systems : Fiber Optic Extenders : Lightware - SW4-OPT-TX240RAK

4x1 Switching Multimode Single Fiber Extender with Bi-directional RS-232 & KVM

DP1.1, DVI, 2x HDMI1.4 fiber optical transmitter with USB KVM, SC fiber connector, local HDMI output & analog balanced audio input. 4K / UHD ( 30Hz RGB 4:4:4 , 60Hz YCbCr 4:2:0), 3D & HDCP support. GPIO & Ethernet local control.

Series: OPT

Model: SW4-OPT-TX240RAK

Part #: 91510027

1920x1080 at 120Hz/4:4:4, 4096x2048 at 30Hz/4:4:4 or 60Hz/4:2:0 maximum resolutions (300MHz)
HDMI 1.4, HDCP 1.4 and DVI 1.0 compliant
HDCP enable/disable function on input
HDCP 1.4 compliant
Bi-directional RS-232 extension (pass-through and control)

View Manufacturers Website

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

SW4-OPT-TX240RAK extends HDMI 1.4, DVI 1.0, HDCP and bi-directional RS-232* signals over one multimode fiber and transmit video signal with embedded audio to a distance of up to 2500 meters. The extender was designed to handle HDMI1.4 and DP1.1 digital video signals and analog stereo audio from local inputs or HDMI embedded audio up to eight channel PCM or HBR audio. Analog audio is converted into digital format. The device has a local HDMI video output for monitoring. The video and the embedded audio of the local output is the same as the one transmitted via the OPT link. SW4-OPT-TX240RAK handles HDCP encryption.

1920x1080 at 120Hz/4:4:4, 4096x2048 at 30Hz/4:4:4 or 60Hz/4:2:0 maximum resolutions (300MHz)
HDMI 1.4, HDCP 1.4 and DVI 1.0 compliant
HDCP enable/disable function on input
HDCP 1.4 compliant
Bi-directional RS-232 extension (pass-through and control)
Uncompressed video up to 9 Gbps datarate (300 MHz pixel clock)
No signal latency, zero frame delay
Extends HDMI 1.4, USB KVM and RS-232 signals over one multimode fiber cable
Adjustable analog audio settings (volume, gain, balance)
Single Fiber Technology
USB KVM (HID) extension
Audio embedding from 3.5mm jack or 5-pole balanced Phoenix connector
Firmware upgrade through USB
Supports all embedded audio formats (including PCM, Dolby Digital and DTS high bitrate audio)
Extension distance up to 2500 meters (with OM3 fiber, 1920x1080p60)
Cross compatible with OPT series Lightware fiber extenders and I/O boards
Advanced EDID Management
Pixel Accurate Reclocking
Command injection on RS-232 and IR ports
GPIO control ports
Multiple TCP/IP connections
Intuitive control software for device configuration
Front panel buttons for crosspoint control
Device control via Ethernet (TCP/IP), RS-232 and USB
CEC support (pass-through)
Supports HDMI 4K signal formats (4K UHD at 30Hz RGB 4:4:4 or at 60Hz YUV 4:2:0, up to 9 Gbps)
No video compression
Built-in video test pattern generator
Local monitor buffered output on transmitter
Twist-and-lock DC power connector
Status LEDs (fiber link, signal and HDCP detect)
Frame Detector (analyze detailed video timings)
External universal power adaptor
5-pole Phoenix balanced analog audio connectors
3,5mm audio jack input
Mounting options for rack, furniture or truss

Extender Type - HDMI
Warranty - Yes
Spec Sheet available - Yes

Certifications: CE
AC Voltage (Maximum): 240 Volts
AC Voltage (Minimum): 100 Volts
Current Draw: 1 Amps
DC Voltage: 5 Volts
Depth: 3.95 in
Height: 1.02 in
Width: 8.70 in
Warranty (Length/Type): 3 Year

Extender 1661535 kb - Data Sheet

Project List

Find a Dealer

Find a Distributor