Individual Circuit Control via RS-232 protocol
The SCLC series of RS-232 controlled Load Center circuit breaker panels offer a labor-saving, one-panel alternative to relay panels. The economical Load Center panels require the least wall space for tight locations and are available in 26 and 41 circuit sizes of 3 phase, 4 wire 208Y/120Vac.
Load Center's are traditional residential panels and are consequently best suited for smaller circuit breaker counts or for applications with limited wall space. The SCLC is more economical than the bigger panelboards.SC-10 Series
Each motorized breaker is RS-232 addressable via a simple set of jumpers on the LynTec control board. Once the RS-232 address starting point is set by inserting the jumper, each motorized breaker has the next sequential address assigned to it (one address per breaker), the RS-232 operator can then program the breaker addresses for individual control. The LynTec control boards only use as many addresses as there are motorized breakers connected to it, this saves valuable RS-232 addresses for other equipment. RS-232 commands for each breaker are on, off or no change.
MB Series Motorized Breakers
The UL Listed heart of all Modular Sequencing Panels!
Available in 15, 20 and 30 Amps, one, two and three poles.
- Saves Space
- Saves redundant installation and hardware costs
- Energy efficient - NO holding current or heat sinks required to maintain state - Runs cool, lasts long
- Automatic load shedding and brownout protection in every panel
- Emergency override function standard on every panel