Meridian’s DT/DR-1Q2A/1Q2A-x product is a state-of-the-art, costeffective, high performance USB/Audio/Keyboard/Mouse transmission system that transports the following signals: keyboard, mouse and 2-ch audio (input/output) over multimode or singlemode fiber using a standard USB 2.0 transport medium. At the transmit side, the USB interface connects directly to a standard USB 2.0 port on your computer and provides a 4-port USB 2.0 hub at the receive side. Four USB ports can be used to connect your computer keyboard, mouse or other USB 2.0 device such as a flash drive or external HDD. The fourth of the USB ports can also be switched to transmit the computer audio output and line input channels and provides them on standard 3.5mm stereo phone jacks on the receive unit.
Digital transmission of USB 2.0, stereo audio, keyboard and mouse over single multimode or singlemode fiber
USB 2.0 Extender with 4-port hub or 2 channel 16-bit audio and 3 USB ports
USB 2.0 4-port hub for keyboard, mouse, external HDD and other USB peripheral devices
Wide optical dynamic range: eliminates need for optical attenuators
ST, FC optical connector
Hot swappable cards
Local LED status indicators to monitor critical system diagnostics for performance parameters
In/Out Impedance:
47k ohms Unbalanced
Frequency Response:
10Hz to 18kHz
SNR:
>80dB (weighted) at 1kHz
Total Harmonic Distortion:
< 0.02% at 1kHz
Resolution:
16 Bit
Fiber Data Rate:
600 Mb/s
Storage Temperature:
-55 to +85 °C
Relative Humidity:
0 to 95% Non-condensing
MTBF:
>120,000 hours at Ground Fix 35°C per MIL217F