Single-Mode Transmitter with 1-channel SDI / HD-SDI Video, 2-channel 24-Bit Audio, 2-channel Contact Closure, 2-channel Multiprotocol Data

Model: FR-1HD2A2C2G/2A2C2G-12

SDI / HD-SDI video transmission (19 Mbps to 1.5Gbps)
Supports the following formats : 19.4 Mbps (SMPTE 310M), 143 To 540 Mbps SMPTE 259M/344M, 1.485 Gbps SMPTE 292M HDTV, DVB-ASI at 270 Mbps, SMPTE 305M SDTI Rates.
Two channels of bi-directional audio, multi-protocol data or contact closure
Built in re-clocker on TX/RX
Wide optical dynamic range: eliminates need for optical attenuators

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Related Products

Documents

The FR-1HD2A2C2G/2A2C2G-12 fiber optic transmission system that takes advantage of Meridian’s new digital encoding technology transmits following signals over one single mode fiber : One real-time, SDI / HD-SDI Video (19 Mbps to 1.5Gbps), Two full duplex 24 bit audio, One user selectable, full duplex RS-232, RS-485 (2 or 4 wire), RS-422, Manchester, Bi-Phase or in combination. In addition, following signals are optionable and interchangable: One user selectable, full duplex RS-232, RS-485 (2 or 4 wire), RS-422, Manchester, Bi-Phase or in combination, Two full duplex contact closure channels. These units featuring built-in Re-clockers that support 3R (Retiming, Reshaping, Regenerate) functions and buffered output. The functionality of this system is enhanced by compatibility with Meridian’s PC based SpectraSmart™, Network Management and Remote Diagnostic Software System. SpectraSmart™ supervises the operating parameters of the transmission system such as status on SDI signal presence, PLL lock, SDI data rates, voltage, temperature, optical levels.

SDI / HD-SDI video transmission (19 Mbps to 1.5Gbps)
Supports the following formats : 19.4 Mbps (SMPTE 310M), 143 To 540 Mbps SMPTE 259M/344M, 1.485 Gbps SMPTE 292M HDTV, DVB-ASI at 270 Mbps, SMPTE 305M SDTI Rates.
Two channels of bi-directional audio, multi-protocol data or contact closure
Built in re-clocker on TX/RX
Wide optical dynamic range: eliminates need for optical attenuators
Surface mount technology (SMT) for high reliability and repeatability
SpectraSmartTM PC based network management
Local LED status indicators to monitor critical system diagnostics for performance parameters
ST, FC optical connector
Hot swappable cards
Laser back biased photo detector circuitry for stable optical output over full temperature range
75 Ohm BNC video connector (Gold center pin)
DB 25 type connectors for audio, data and contact closure

Fiber Optic Connector Type - Other
Fiber Optic Signals Supported - Audio
Fiber Optic Signals Supported - RS-232
Fiber Optic Signals Supported - Other
Rackmountable - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 165.20 F
Operating Temperature (Minimum): -29.20 F
Operating Distance (Singlemode): 180446.20 ft
Number of Singlemode Outputs: 4
Signal to Noise Ratio: 15 dB
AC Voltage (Maximum): 264 Volts
AC Voltage (Minimum): 87 Volts
Peak Power: 5 Watt
Depth: 6.30 in
Height: 5 in
Width: 0.79 in
Product Weight: 99.21 lbs

FT-1HD2A2C2G/2A2C2G-12 - Single-mode Transmitter with 1-channel SDI / HD-SDI Video, 2-channel 24-Bit Audio, 2-channel Contact Closure

Fiber Optic Receiver & Transmitter 687862 kb - Data Sheet

Project List

Request Quote

Find a Dealer

Suggested Products

openGear 1-channel 3G-SDI/LC Single Mode LC Fiber Transceiver with DashBoard Support

by AJA Video

Dual Analog Video with 4 Channel Analog Audio Fiber Transmitter, CWDM DFB laser, VistaLINK

by Evertz

HD-SDI 4 AES Bi-directional RS-232/RS-422, GPI/O Fiber Transmitter, Dual Fiber, DWDM Tx

by Evertz