hamburger-nav-icon
region-flag-icon
Search by Category
Audio
Cameras
Cases & Bags
Computers & Software
Conferencing
Content Management
Control
Displays
Furniture
Lighting & Studio
Mounts & Rigging
Networking & Cabling
Power
Presentation
Production
Security & Safety
Signal Management
Search by Category
EnglishFrenchGermanItalianPortugueseSpanish
Meridian Technologies, Inc. - FR-4W2D/2D-5
Request Quote

Single-mode Fiber-optic Receiver Module, 4 NTSC/PAL Video, 2 RS-232D Data

Model: FR-4W2D/2D-5

  • Transmits 4-channel of NTSC/PAL video, 2 bi-directional RS-232 data over one fiber
  • Single-mode fiber
  • 10 Bit video digital encoding
  • 7 MHz video bandwidth
  • 75 Ohm BNC video connector (Gold Center Pin)
Compare
Project List
Product Info
Tech Specs
Documents
The fiber-optic system incorporates digital encoding technology. This fiber-optic module transmits 4-channels of multiplexed NTSC/PAL Video (10Bit,7MHz), 2-bi-directional RS-232 data over one fiber.

The versatility of the fiber-optic system is improved by SpectraView, an on-screen-video-diagnostic/setup firmware system and SpectraSmart, an optional PC based network-diagnostic-system. SpectraView monitors the integrity of the fiber link. A break in the fiber path will cause a loss of fiber alarm to be displayed on an associated monitor. SpectraView is easy to use, always active and eliminates the need for additional test equipment. SpectraView includes a selectable on-board audio & data test signal generator with built-in local and remote loop-back functions.

The fiber-optic system is available as rack mount cards and modules that can be installed in Meridians card chassis, desk chassis and 19" racking frames. This system can be configured in either star (module to rack) or trunking (rack to rack) configurations. These systems can be made a standalone system by using the SR-500, 1 slot desk/wall mount chassis (12VAC-24VAC)

  • Transmits 4-channel of NTSC/PAL video, 2 bi-directional RS-232 data over one fiber
  • Single-mode fiber
  • 10 Bit video digital encoding
  • 7 MHz video bandwidth
  • 75 Ohm BNC video connector (Gold Center Pin)
  • Wide optical dynamic range eliminates need for optical attenuators
  • Surface mount technology (SMT) for high reliability and repeatability
  • SpectraSmartTM network management compatible
  • Local LED status indicators to monitor critical
  • System diagnostics for performance parameters
  • ST, FC optical connector
  • Laser back biased photo detector circuitry for stable optical output over full temperature range
 
Request Quote
 

Suggested Products