Multi-mode Fiber-optic Transmitter Module, 1 RGB Video

Model: ST-1RG-0

Transmits 1 channel of RGB video over one fiber
Digital transmission of DVI/RGBHV/RGsB video over one multimode fiber
Supports VGA, SVGA, XGA, SXGA and UXGA (640x480x60 to 1920x1080x60Hz)
HDTV resolution of 480p, 720p, and 1080p
H and V sync frequency range of 60 to 150Hz (vertical), 30 to 130kHz (horizontal)

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Documents

The ST-1RG-0 fiber-optic receiver module system incorporates digital encoding technology. This fiber-optic module transmits 1 channel of RGB video over one fiber. This is multi-mode fiber system. The ST/SR-1RG-0 product is fully compatible with Meridians PC based SpectraSmart network management and diagnostic software system. SpectraSmart supervises the operating parameters of the transmission system such as the status on video levels, sync, digital carrier detect, voltages, temperatures and optical levels.

Transmits 1 channel of RGB video over one fiber
Digital transmission of DVI/RGBHV/RGsB video over one multimode fiber
Supports VGA, SVGA, XGA, SXGA and UXGA (640x480x60 to 1920x1080x60Hz)
HDTV resolution of 480p, 720p, and 1080p
H and V sync frequency range of 60 to 150Hz (vertical), 30 to 130kHz (horizontal)
Uses all-digital processing and transmission for crystal-clear signals and no color skewing
Real-time video transmission for exceptional quality and resolution, no video compression
Auto detects, switches resolution and sync configurations
Requires no adjustments, equalization or de-skewing during setup
Data throughput in excess of 6Gbps (uncompressed)
Most systems have 1.25Gbps throughput with significant compression
Supports DDC (data display channel)
Ruggedized aluminum housing and face plate
Wide optical dynamic range: eliminates need for optical attenuators
Laser based systems for multi-mode and single-mode
Surface mount technology (SMT) for high reliability and repeatability
SpectraSmartTM network management compatible
Local LED status indicators to monitor critical
System diagnostics for performance parameters
ST and FC optical connector
Hot swappable cards
Laser back, biased photo detector circuitry for stable optical output over full temperature range

Fiber Optic Connector Type - Other
Fiber Optic Signals Supported - DVI
Fiber Optic Signals Supported - RGB
Fiber Optic Signals Supported - RGBHV
Rackmountable - Yes
Warranty - Yes
Spec Sheet available - Yes

Operating Temperature (Maximum): 158 F
Operating Temperature (Minimum): -29.20 F
Signal to Noise Ratio: 60 dB
Depth: 6.30 in
Height: 5 in
Width: 0.79 in
Product Weight: 0.99 lbs
Warranty (Length/Type): 10 Years

Fiber-optic Transmitter Module 610 kb - Data Sheet

Project List

Request Quote

Find a Dealer

Suggested Products

1-Channel 12G-SDI Single Mode LC Fiber Rx SFP

by AJA Video

Quad SDI/ASI Multiplexer Fiber Transmitter

by Evertz

Single Multi-Mode LC 3G Fiber Rx SFP

by AJA Video