hamburger-nav-icon
region-flag-icon
Search by Category
Audio
Cameras
Cases & Bags
Computers & Software
Conferencing
Content Management
Control
Displays
Furniture
Lighting & Studio
Mounts & Rigging
Networking & Cabling
Power
Presentation
Production
Security & Safety
Signal Management
Search by Category
EnglishFrenchGermanItalianPortugueseSpanish
MuxLab - 500755-AMP

Audio / AMP over IP PoE Extender Kit with Mic

Model: 500755-AMP

  • Supports a 2x50W Amplifier
  • Supports bridge-mode for 1x100W
  • Control input selection, plus volume, bass and treble
  • Manage locally via push/turn knob and LCD display or remotely via web interface
  • Compatible with 500755-70V for 70V speaker systems
Compare
Project List
Product Info

The Audio / AMP over IP PoE Extender Kit with Mic includes a Transmitter (500755-AMP-TX) and a Receiver (500755-AMP-RX) allowing a 2CH analog audio and Mic signal to be extended over an IP network, and up to 330ft (100m) from an Ethernet Switch via Cat5e/6 cable in a point-to-point configuration. Point-to-multipoint and multipoint-to-multipoint is supported by connecting several Transmitters and Receivers to the same local Ethernet network. Depending on the application one or more Transmitters (500755-AMP-TX) can communicate with (or multicast to) multiple Receivers (500755-AMP-RX).The Transmitter supports PoE (PD) if used with a PoE (PSE) Ethernet Switch. Supports RS232 and IR transmission for remote control of end devices.

  • Supports a 2x50W Amplifier
  • Supports bridge-mode for 1x100W
  • Control input selection, plus volume, bass and treble
  • Manage locally via push/turn knob and LCD display or remotely via web interface
  • Compatible with 500755-70V for 70V speaker systems
  • Supports point-to-point, point-to-multipoint and multipoint-to-multipoint applications
  • Supports 100’s of Transceivers depending on network bandwidth
  • Supports RS232 and IR transmission for remote control
  • 2CH Analog Audio In/Out & Digital Audio Out
 
 

Suggested Products